Discussion of 'Making use of brace overstrength to improve the seismic response of multistorey split-X concentrically braced steel frames'~1

摘要

The authors have pointed out inconsistencies among the design and analysis assumptions used in Redwood et al. (1991). These inconsistencies originated from the collaboration among the first two authors of this reference, Redwood and Lu. In the paper under discussion, the first series of structures studied (the 2 to 12 storey L, R, and S buildings in Victoria and Quebec City) were designed without inclusion of P-delta effects that were included in the subsequent analyses. As pointed out in the paper, the lower base shear forces mandated by the 2005 National Building Code of Canada (NBCC) (NRCC 2005) compared with those in the 1990 NBCC (NRCC 1990) make P-delta effects more critical than earlier requirements. These forces are not insignificant. For example, the paper indicates that for the eight-storey L and R buildings in Victoria, the P-delta shear forces in the lowest storey would have increased the design shear forces by 20 percent and 30 percent, respectively. The enhanced storey ductility redistribution capacity (EDSRC) designed frames did have P-delta effects included; therefore, the improved performance of these buildings compared with the first series must be attributed to both the EDSRC approach and the impact of the P-delta forces included in these designs.