...
首页> 外文期刊>Food and bioprocess technology >Mathematical modeling and simulation of microwave thawing of large solid foods under different operating conditions. (CIGR Symposium Special Issue.)
【24h】

Mathematical modeling and simulation of microwave thawing of large solid foods under different operating conditions. (CIGR Symposium Special Issue.)

机译:不同操作条件下大型固体食品微波解冻的数学建模和仿真。 (CIGR专题讨论会特刊。)

获取原文
获取原文并翻译 | 示例
           

摘要

Microwaves require shorter times to increase foodstuffs temperature when compared to conventional heating methods. However, there are some problems associated to temperature distribution within the products, owing to the preferential absorption of electromagnetic energy by liquid water, caused by differences between its dielectric properties and those of ice ("runaway"). To analyze the behavior of food microwave thawing, a mathematical three-dimensional (3D) model was developed by solving the unsteady-state heat and mass transfer differential equations; this model can be applied to large systems for which Lambert's law is valid. Thermal, mass transport, and electromagnetic properties varying with temperature were used. The numerical solution was developed using an implicit Crank-Nicolson finite difference method using the classical formulation for one-dimensional (1D) systems and the alternating direction method in two and three dimensions. The model was validated using experimental data from the literature for 1D and two-dimensional conditions and with experiments performed in our laboratory for 3D heat transfer using frozen meat. It was applied to predict temperature and water concentration profiles under different thawing conditions in meat products and to simulate the effect of a fat layer located at the surface of the meat piece on temperature profiles. For different product sizes in rectangular geometry, numerical simulations demonstrated that microwave thawing times were significantly lower in comparison to conventional thawing methods. To prevent overheating during thawing, the combination of continuous microwave power with simultaneous application of air convection and the application of microwave power cycles, using refrigerated air convection with controlled surface temperature, were analyzed.Digital Object Identifier http://dx.doi.org/10.1007/s11947-009-0249-0
机译:与传统的加热方法相比,微波需要更短的时间来提高食品温度。但是,由于液态水的电磁能与冰的介电性质之间的差异(“失控”)而导致液态水优先吸收电磁能,因此与产品内的温度分布相关联,存在一些问题。为了分析食物微波解冻的行为,通过求解非稳态传热和传质微分方程,建立了数学三维模型(3D)。该模型可以应用于兰伯特定律有效的大型系统。使用随温度变化的热,传质和电磁特性。数值解决方案是使用隐式Crank-Nicolson有限差分方法开发的,该方法使用了一维(1D)系统的经典公式以及二维和三维交替方向方法。使用来自文献的一维和二维条件下的实验数据以及在我们的实验室中使用冷冻肉进行的3D传热实验,对模型进行了验证。它可用于预测肉类产品在不同解冻条件下的温度和水浓度曲线,并模拟位于肉块表面的脂肪层对温度曲线的影响。对于矩形几何形状中的不同产品尺寸,数值模拟表明,与传统的解冻方法相比,微波解冻时间明显缩短。为了防止解冻期间的过热,分析了连续微波功率与同时应用空气对流和微波功率循环的应用(使用具有受控表面温度的冷藏空气对流)的结合。数字对象标识符http://dx.doi.org /10.1007/s11947-009-0249-0

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号