...
首页> 外文期刊>Green chemistry >Recovery of scandium from leachates of Greek bauxite residue by adsorption on functionalized chitosan-silica hybrid materials
【24h】

Recovery of scandium from leachates of Greek bauxite residue by adsorption on functionalized chitosan-silica hybrid materials

机译:通过功能化的壳聚糖-二氧化硅杂化材料吸附从希腊铝土矿残渣渗滤液中回收of。

获取原文
获取原文并翻译 | 示例

摘要

Bauxite residue (red mud) is a waste residue that results from the production of alumina by the Bayer process. Since it has no large-scale industrial application, it is stockpiled in large reservoirs. Nevertheless, it should be considered as a valuable secondary resource as it contains relatively large concentrations of critical metals like the rare earths, scandium being the most important one. In this work, we investigated the recovery of scandium from real leachates of Greek bauxite residue. In the separation of scandium from the other elements, the biggest challenge arose from the chemical similarities between scandium(III) and iron(III). This hampers high selectivity for scandium, especially because iron, as one of the major elements in bauxite residue, is present in much higher concentrations than scandium. In order to achieve selectivity for scandium, chitosan-silica particles were functionalized with the chelating ligands diethylenetriamine pentaacetic acid (DTPA) and ethyleneglycol tetraacetic acid (EGTA). Both organic ligands were chosen because of the high stability constants between scandium(III) and the corresponding functional groups. The adsorption kinetics and the influence of pH on hydrolysis and adsorption were investigated batchwise from single-element solutions of scandium(III) and iron(III). In binary solutions of scandium(III) and iron(III), it was observed that only EGTA-functionalized chitosan-silica appeared to be highly selective for scandium(III) over iron(III). EGTA-chitosan-silica shows a much higher selectivity over state-of-the-art adsorbents for the separation of scandium(III) from iron(III). The latter material was therefore used as a resin material for column chromatography in order to effectively separate scandium from bauxite residue. Full separation was achieved by eluting the column with HNO3 solution at pH 0.50; at this pH all other elements had already eluted.
机译:铝土矿残渣(红泥)是由拜耳法生产氧化铝产生的废渣。由于没有大规模的工业应用,因此将其存储在大型水库中。但是,它应被视为有价值的辅助资源,因为它包含相对较高浓度的关键金属,如稀土,其中being是最重要的。在这项工作中,我们研究了从希腊铝土矿残渣的真实浸出液中回收dium的方法。在the与其他元素的分离中,最大的挑战来自scan(III)和铁(III)之间的化学相似性。这阻碍了对scan的高选择性,特别是因为铁作为铝土矿残渣中的主要元素之一,以比scan更高的浓度存在。为了达到对scan的选择性,用螯合配体二亚乙基三胺五乙酸(DTPA)和乙二醇四乙酸(EGTA)将壳聚糖二氧化硅颗粒官能化。选择两种有机配体是因为scan(III)和相应的官能团之间具有很高的稳定性常数。从single(III)和铁(III)的单元素溶液中分批研究了吸附动力学和pH对水解和吸附的影响。在binary(III)和铁(III)的二元溶液中,观察到只有EGTA官能化的壳聚糖二氧化硅对appeared(III)的选择性比铁(III)高。与最先进的吸附剂相比,EGTA-壳聚糖-二氧化硅对select(III)与铁(III)的分离具有更高的选择性。因此,后一种材料用作柱色谱法的树脂材料,以便有效地将scan与铝土矿残留物分离。通过用pH 0.50的HNO3溶液洗脱色谱柱可实现完全分离。在此pH下,所有其他元素均已洗脱。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号