首页> 外文期刊>Bulletin of Materials Science >New NaSrPO4:Sm3+ phosphor as orange-red emitting material
【24h】

New NaSrPO4:Sm3+ phosphor as orange-red emitting material

机译:新型NaSrPO4:Sm3 +荧光粉作为橙红色发光材料

获取原文
获取原文并翻译 | 示例
           

摘要

Sm3+-activated NaSrPO4 phosphors could be efficiently excited at 403 nm, and exhibited a bright red emission mainly including four wavelength peaks of 565, 600, 646 and 710 nm. The highest emission intensity was found for NaSr (1-x) PO4: xSm(3+) with a composition of x = 0.007. Concentration quenching was observed as the composition of x exceeds 0.007. The decay time values of NaSr1-x PO (4) : xSm(3+) phosphors range from around 2.55 to 3.49 ms. NaSr1-x PO4: xSm(3+) phosphor shows a higher thermally stable luminescence and its thermal quenching temperature T (50) was found to be 350A degrees C, which is higher than that of commercial YAG:Ce3+ phosphor and ZnS:(Al, Ag) phosphor. Because NaSr1-x PO4: xSm(3+) phosphor features a high colour-rendering index and chemical stability, it is potentially useful as a new scintillation material for white light-emitting diodes.
机译:Sm3 +活化的NaSrPO4荧光粉可在403 nm处有效激发,并呈现亮红色发射,主要包括565、600、646和710 nm的四个波长峰。发现NaSr(1-x)PO4:xSm(3+)的最高发射强度,其x = 0.007。当x的组成超过0.007时,观察到浓度淬灭。 NaSr1-x PO(4):xSm(3+)磷光体的衰减时间范围从2.55到3.49 ms。 NaSr1-x PO4:xSm(3+)荧光粉显示出更高的热稳定发光性能,并且其热淬火温度T(50)为350A摄氏度,高于商业YAG:Ce3 +荧光粉和ZnS:(Al ,Ag)磷。由于NaSr1-x PO4:xSm(3+)荧光粉具有很高的显色指数和化学稳定性,因此它有可能用作白色发光二极管的新型闪烁材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号