...
首页> 外文期刊>Investigative radiology >Computer-assisted myocardial thickening analysis of gated MIBI SPECT images.
【24h】

Computer-assisted myocardial thickening analysis of gated MIBI SPECT images.

机译:门控MIBI SPECT图像的计算机辅助心肌增厚分析。

获取原文
获取原文并翻译 | 示例

摘要

RATIONALE AND OBJECTIVES: The purpose of this study is to use the relationship between the partial volume effect, count density, matrix size, and reconstruction filter in gated single photon emission computer tomography (SPECT) to recover myocardial thickness, and to validate measurements generated using a computer-assisted automatic contour method with a phantom model and with thickness changes measured by echocardiography. METHODS: Regional myocardial contour was defined automatically using shape constraints, gray level thresholding, and a gradient method applied to gated technetium-99m (99mTc)-methoxy-isobutyl-isonitile (MIBI) SPECT images. A heart phantom with wall thickness ranging from 0.8 cm to 1.3 cm was constructed. SPECT images were acquired and reconstructed using different matrix sizes, count densities, and filters. Wall thickness determinations derived from the reconstructions made with each combination of matrix size, type of filter, and cutoff frequency were correlated with the measured thicknesses. The best combination was applied to the gated MIBI SPECT images of 55 patients who also had echocardiography and coronary arteriography. Count density measurements were made across each regional myocardial segment to evaluate wall thickness at end-diastole and end-systole. Systolic wall thickening measurements made with this automated computer-assisted contour technique were compared with echocardiographic measurements made from segments with normal perfusion and from regions containing infarcted tissue. RESULTS: Different reconstruction filters and cutoff frequencies affected the accuracy of measurements of myocardial wall thickness determined from gated myocardial SPECT images. A matrix size of 64 x 64, with a minimum of 10 counts/pixel/frame, and use of a Hanning filter with 0.5 cyc/cm cutoff frequency gave the best combination for myocardial thickness determination and spatial resolution. Application of these factors to the phantom yielded results that correlated very well with the thickness measurements (r = 0.986, P < 0.001). Application of the technique to the clinical SPECT studies yielded measurements of myocardial wall thickening that were not significantly different from that determined by echocardiography. CONCLUSION: Computer-assisted contour analysis of gated SPECT images enables accurate determination of regional wall thickening using the count density changes within each myocardial segment.
机译:理由和目的:这项研究的目的是利用门控单光子发射计算机断层扫描(SPECT)中部分体积效应,计数密度,基质尺寸和重建滤光片之间的关系来恢复心肌厚度,并验证使用一种计算机辅助自动轮廓方法,该模型具有幻像模型并通过超声心动图测量厚度变化。方法:使用形状限制,灰度阈值化和梯度方法自动定义区域心肌轮廓,该方法适用于门控99 99m(99mTc)-甲氧基-异丁基-异烟酰胺(MIBI)SPECT图像。构造了壁厚在0.8cm至1.3cm范围内的心脏模型。使用不同的矩阵大小,计数密度和滤镜获取并重建SPECT图像。由对矩阵尺寸,滤波器类型和截止频率的每种组合进行的重构得出的壁厚确定值与测得的厚度相关。最佳组合应用于55位同时进行了超声心动图和冠状动脉造影的患者的门控MIBI SPECT图像。在每个区域心肌节段进行计数密度测量,以评估舒张末期和收缩末期的壁厚。将使用这种自动计算机辅助轮廓技术进行的收缩期壁增厚测量结果与从具有正常灌注段和包含梗塞组织区域的超声心动图测量结果进行比较。结果:不同的重建滤波器和截止频率影响了从门控心肌SPECT图像确定的心肌壁厚测量的准确性。矩阵大小为64 x 64,最少10个像素/像素/帧,并使用具有0.5 cyc / cm截止频率的汉宁滤波器,可为确定心肌厚度和空间分辨率提供最佳组合。将这些因素应用到体模上可得出与厚度测量值非常相关的结果(r = 0.986,P <0.001)。该技术在临床SPECT研究中的应用得出的心肌壁增厚的测量值与超声心动图确定的测量值没有显着差异。结论:门控SPECT图像的计算机辅助轮廓分析可利用每个心肌节段内的计数密度变化来准确确定区域壁增厚。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号