首页> 外文期刊>International Polymer Processing: The Journal of the Polymer Processing Society >Fabrication of Electrospun Chitosan and Chitosan/Poly(ethylene oxide) Nanofiber Webs and Assessment of Their Antimicrobial Activity
【24h】

Fabrication of Electrospun Chitosan and Chitosan/Poly(ethylene oxide) Nanofiber Webs and Assessment of Their Antimicrobial Activity

机译:静电纺丝壳聚糖和壳聚糖/聚(环氧乙烷)纳米纤维网的制备及其抗菌活性评估

获取原文
获取原文并翻译 | 示例
           

摘要

In recent years, production of nano-sized wound dressing materials from biopolymers by electrospinning method has attracted great attention. In this study, chitosan that is an inherently antimicrobial polymer and chitosan (CS)Zpoly(ethylene oxide) (PEO) blend solutions were electrospun to obtain nanofiber webs for wound-dressing applications. Although electrospinning of chitosan with PEO was previously studied, this study emphasized the effect of molecular weight of polymer used, total polymer concentration and electrical conductivity of polymer solution on fiber formation. Results show that selection of suitable solvent and determination of optimum process parameters were key factors for obtaining uniform nanofibers. Antimicrobial activities of these nanofiber webs against S.aureus, E.coli, and C.albicans were tested according to AATCC 100-2004. Over 99 % reduction in the number of microorganisms with pure chitosan nanofibers and over 50 % reduction with CS/PEO blend nanofibers were obtained.
机译:近年来,通过电纺丝法由生物聚合物生产纳米级伤口敷料材料引起了广泛的关注。在这项研究中,将固有抗微生物聚合物壳聚糖和壳聚糖(CS)Z聚环氧乙烷(PEO)混合溶液进行静电纺丝,以获得用于伤口敷料的纳米纤维网。尽管以前已经研究了用PEO对壳聚糖进行静电纺丝,但该研究强调了所用聚合物的分子量,总聚合物浓度和聚合物溶液的电导率对纤维形成的影响。结果表明,选择合适的溶剂和确定最佳工艺参数是获得均匀纳米纤维的关键因素。根据AATCC 100-2004,测试了这些纳米纤维网对金黄色葡萄球菌,大肠杆菌和白色念珠菌的抗菌活性。使用纯壳聚糖纳米纤维可将微生物数量减少99%以上,使用CS / PEO共混纳米纤维可将微生物数量减少50%以上。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号