首页> 外文期刊>British journal of ophthalmology >Evaluation of corneal thickness and topography in normal eyes using the Orbscan corneal topography system.
【24h】

Evaluation of corneal thickness and topography in normal eyes using the Orbscan corneal topography system.

机译:使用Orbscan角膜地形图系统评估正常眼睛的角膜厚度和地形。

获取原文
获取原文并翻译 | 示例
           

摘要

AIMS: To map the thickness, elevation (anterior and posterior corneal surface), and axial curvature of the cornea in normal eyes with the Orbscan corneal topography system. METHODS: 94 eyes of 51 normal subjects were investigated using the Orbscan corneal topography system. The anterior and posterior corneal elevation maps were classified into regular ridge, irregular ridge, incomplete ridge, island, and unclassified patterns, and the axial power maps were grouped into round, oval, symmetric bow tie, asymmetric bow tie, and irregular patterns. The pachymetry patterns were designated as round, oval, decentred round, and decentred oval. RESULTS: The thinnest point on the cornea was located at an average of 0.90 (SD 0. 51) mm from visual axis and had an average thickness of 0.55 (0.03) mm. In 69.57% of eyes, this point was located in the inferotemporal quadrant, followed by the superotemporal quadrant in 23.91%, the inferonasal quadrant in 4.35%, and the superonasal quadrant in 2.17%. Among the nine regions of the cornea evaluated (central, superotemporal, temporal, inferotemporal, inferior, inferonasal, nasal, superonasal, and superior) the central cornea had the lowest average thickness (0.56 (0.03) mm) and the superior cornea had the greatest average thickness (0.64 (0.03) mm). The mean simulated keratometry (SimK) was 44.24 (1.61)/43.31 (1.66) dioptres (D) and the mean astigmatism was 0.90 (0.41) D. Island (71.74%) was the most common elevation pattern observed in the anterior corneal surface, followed by incomplete ridge (19.57%), regular ridge (4.34%), irregular ridge (2.17%), and unclassified (2.17%). Island (32.61%) was the most common topographic pattern in the posterior corneal surface, following by regular ridge (30.43%), incomplete ridge (23. 91%), and irregular ridge (13.04%) patterns. Symmetric bow tie was the most common axial power pattern in the anterior cornea (39.13%), followed by oval (26.07%), asymmetric bow tie (23.91%), round (6. 52%), and irregular (4.53%) patterns. In the pachymetry maps, 47.83% of eyes had an oval pattern, and round, decentred oval, and decentred round were observed in 41.30%, 8.70%, and 2.18% of eyes, respectively. CONCLUSION: The information on regional corneal thickness, corneal elevation and axial corneal curvature obtained with the Orbscan corneal topography system from normal eyes provides a reference for comparison with diseased corneas. The Orbscan corneal topography system is a useful tool to evaluate both corneal topography and corneal thickness.
机译:目的:使用Orbscan角膜地形图系统绘制正常眼睛中角膜的厚度,高度(角膜前后表面)和轴向曲率。方法:使用Orbscan角膜地形图系统对51名正常受试者的94只眼睛进行了调查。角膜前和后角高程图分为规则脊,不规则脊,不完全脊,岛和未分类模式,而轴向屈光图分为圆形,椭圆形,对称领结,不对称领结和不规则模式。测厚法模式被指定为圆形,椭圆形,偏心圆形和偏心椭圆形。结果:角膜最薄点位于距视轴平均0.90(SD 0. 51)mm处,平均厚度为0.55(0.03)mm。在69.57%的眼睛中,此点位于颞下象限,其次为颞上象限(23.91%),鼻下象限(4.35%)和鼻上象限(2.17%)。在所评估的九个角膜区域(中央,颞上,颞下,颞下,下,鼻下,鼻,上鼻和上半部)中,角膜中央的平均厚度最低(0.56(0.03)mm),而上角膜最大平均厚度(0.64(0.03)毫米)。模拟角膜曲率(SimK)平均为44.24(1.61)/43.31(1.66)屈光度(D),平均散光为0.90(0.41)D.岛(71.74%)是在角膜前表面观察到的最常见的抬高模式,其次是不完整的山脊(19.57%),规则的山脊(4.34%),不规则的山脊(2.17%)和未分类的(2.17%)。岛(32.61%)是角膜后表面最常见的地形图样,其次是规则的脊线(30.43%),不完全的脊线(23. 91%)和不规则的脊线(13.04%)。对称领结是角膜前部最常见的轴向屈光模式(39.13%),其次是椭圆形(26.07%),不对称领结(23.91%),圆形(6. 52%)和不规则(4.53%)模式。在测厚图中,47.83%的眼睛呈椭圆形,分别在41.30%,8.70%和2.18%的眼睛中观察到圆形,偏心的椭圆形和偏心的圆形。结论:通过Orbscan角膜地形图系统从正常眼睛获得的有关角膜局部厚度,角膜高度和轴向角膜曲率的信息可为与患病角膜进行比较提供参考。 Orbscan角膜地形图系统是评估角膜地形图和角膜厚度的有用工具。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号