首页> 外文期刊>International Journal of Automotive Technology >EXHAUST EMISSIONS AND ITS CONTROL METHODS IN COMPRESSION IGNITION ENGINES: A REVIEW
【24h】

EXHAUST EMISSIONS AND ITS CONTROL METHODS IN COMPRESSION IGNITION ENGINES: A REVIEW

机译:压缩点火发动机的尾气排放及其控制方法综述

获取原文
获取原文并翻译 | 示例
       

摘要

Extensive usage of automobiles has certain disadvantages and one of them is its negative effect on environment. Carbon dioxide (CO_2), carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NO_x), sulphur dioxide (SO_2) and particulate matter (PM) come out as harmful products during incomplete combustion from internal combustion (IC) engines. As these substances affect human health, regulatory bodies impose increasingly stringent restrictions on the level of emissions coming out from IC engines. This trend suggests the urgent need for the investigation of all aspects relevant to emissions. It is required to modify existing engine technologies and to develop a better after-treatment system to achieve the upcoming emission norms. Diesel engines are generally preferred over gasoline engines due to their undisputed benefit of fuel economy and higher torque output. However, diesel engines produce higher emissions, particularly NO_x and PM. After-treatment systems are costly and occupy more space, hence, in-cylinder solutions are preferred in reducing emissions. Exhaust gas recirculation (EGR) technology has been utilized previously to reduce NO_x. Though it is quite successful for small engines, problem persists with large bore engines and with high rate of EGR. EGR helps in reducing NO_x, but increases particulate emissions and fuel consumption. Many in-cylinder solutions such as lower compression ratios, modified injection characteristics, improved air intake system etc. are required along with EGR to accomplish the future emission norms. Modern combustion techniques such as low temperature combustion (LTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) etc. would be helpful for reducing the exhaust emissions and improving the engine performance. However, controlling of autoignition timing and achieving wider operating range are the major challenges with these techniques. A comprehensive review of diesel engine performance and emission characteristics is given in this paper.
机译:汽车的广泛使用具有某些缺点,其中之一是其对环境的负面影响。内燃机(IC)进行不完全燃烧时,二氧化碳(CO_2),一氧化碳(CO),碳氢化合物(HC),氮氧化物(NO_x),二氧化硫(SO_2)和颗粒物(PM)会作为有害产物排出。随着这些物质影响人类健康,监管机构对来自IC引擎的排放水平施加了越来越严格的限制。这种趋势表明,迫切需要对与排放有关的所有方面进行调查。需要修改现有的发动机技术并开发更好的后处理系统,以实现即将到来的排放标准。由于柴油发动机无可争议的燃油经济性和更高的扭矩输出优势,因此通常比汽油发动机更受青睐。但是,柴油发动机会产生更高的排放,尤其是NO_x和PM。后处理系统价格昂贵并且占用更多空间,因此,缸内解决方案在减少排放方面是首选。排气再循环(EGR)技术先前已被利用来减少NO_x。尽管对于小型发动机来说非常成功,但大口径发动机和高EGR率仍然存在问题。 EGR有助于减少NO_x,但会增加颗粒物排放和燃料消耗。需要许多缸内解决方案,例如较低的压缩比,改进的喷射特性,改进的进气系统等,以实现未来的排放标准。诸如低温燃烧(LTC),均质充气压缩点火(HCCI),预混合充气压缩点火(PCCI)等现代燃烧技术将有助于减少废气排放并改善发动机性能。然而,控制自动点火正时并实现更大的工作范围是这些技术的主要挑战。本文对柴油机的性能和排放特性进行了全面综述。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号