首页> 外文期刊>Intermetallics >Structural characterization of the scale formed on a Ti-46Al-8Nb alloy oxidised in air at 700 deg C
【24h】

Structural characterization of the scale formed on a Ti-46Al-8Nb alloy oxidised in air at 700 deg C

机译:在700摄氏度的空气中氧化的Ti-46Al-8Nb合金上形成的氧化皮的结构表征

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The structures of the oxide scale formed on a lamellar (gamma + alpha_2) Ti46Al8Nb alloy after heat-treatment in air at 700 deg C for 50 and 1000 h have been compared. Though the outer scale is thicker after 1000 h, both oxide scales are similarly layered with an outer aluminium-rich layer. The main difference is that the aluminium-rich oxide is amorphous after 50 h while it becomes cubic gamma alumina after 1000 h. After 50 h, the presence of TiN was detected at the interface between the scale and the base metal. After 1000 h of oxidation, the subscale region is divided into two clearly separated zones differing by their composition, with a thick TiN layer close to the oxide scale. From these observations, it appears that the development of the oxide scale at 700 deg C is similar to the scheme proposed in the literature for short times at higher temperatures, with the initial formation of a transient aluminium-rich oxide layer, which here is amorphous, and precipitates of TiN at the scale/metal interface that oxidise afterwards to rutile.
机译:比较了片状(γ+α_2)Ti46Al8Nb合金在空气中于700摄氏度热处理50和1000小时后形成的氧化皮的结构。尽管在1000 h后外层氧化皮变厚,但两个氧化皮都同样地在外层富铝层上分层。主要区别在于富铝氧化物在50小时后为非晶态,而在1000小时后变为立方γ氧化铝。 50小时后,在氧化皮和贱金属之间的界面处检测到TiN的存在。氧化1000小时后,该子氧化层区域被划分为两个明显分开的区域,这些区域的成分不同,并且靠近氧化物氧化层的TiN层较厚。从这些观察结果看来,在较高温度下短时间内在700摄氏度下氧化皮的发展与文献中提出的方案相似,初始形成的是瞬态富铝氧化物层,此处是非晶态以及TiN在水垢/金属界面处的沉淀,随后氧化为金红石。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号