Structural characterization of the scale formed on a Ti–46Al–8Nb alloy oxidised in air at 700 C

摘要

The structures of the oxide scale formed on a lamellar (gþ a2) Ti46Al8Nb alloy after heat-treatment in air at 700 C for 50 and 1000 h have been compared. Though the outer scale is thicker after 1000 h, both oxide scales are similarly layered with an outer aluminium-rich layer. The main difference is that the aluminium-rich oxide is amorphous after 50 h while it becomes cubic gamma alumina after 1000 h. After 50 h, the presence of TiN was detected at the interface between the scale and the base metal. After 1000 h of oxidation, the subscale region is divided into two clearly separated zones differing by their composition, with a thick TiN layer close to the oxide scale. From these observations, it appears that the development of the oxide scale at 700 C is similar to the scheme proposed in the literature for short times at higher temperatures, with the initial formation of a transient aluminium-rich oxide layer, which here is amorphous, and precipitates of TiN at the scale/metal interface that oxidise afterwards to rutile