首页> 外文期刊>Innovative Food Science & Emerging Technologies >Computational fluid dynamics simulation studies on pasteurization of egg in stationary and rotation modes.
【24h】

Computational fluid dynamics simulation studies on pasteurization of egg in stationary and rotation modes.

机译:静止和旋转模式下鸡蛋巴氏灭菌的计算流体动力学模拟研究。

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Eggs contain many nutritive compounds and are consumed all over the world. Pasteurization is an important unit operation for inactivation of pathogenic bacteria and is widely used for inactivation of Salmonella Enteritidis. Experimental studies and computational fluid dynamics (CFD) simulations were performed on thermal pasteurization of egg at 55.6 degrees C. In this study, CFD simulation of temperature predictions was validated with experimental measurements of the temperature in the egg without yolk. After validation, a whole egg (with yolk) was simulated in CFD at two different modes namely stationary and rotation (at 2.5 and 5 rpm). These results revealed that the stationary egg took about 30 min to reach the pasteurization temperature, whereas, rotating egg needed only 9.5 min. This reduction in processing time minimizes the thermal damage of the egg's nutrients. Hence, rotation of egg made the thermal pasteurization process more efficient. Moreover, prediction of inactivation of S. Enteritidis based on the process value F (min) also reinforced the positive effect of rotation during thermal pasteurization. Industrial Relevance: In recent years, a rapid development in the application of CFD in food processing operations has been witnessed. The main need for CFD analysis of pasteurization is to determine the uniform and effective heat distribution in the egg and to examine the position of slowest heating zone (SHZ). Relatively few works have been published related to applications of CFD in thermal processing of egg. However, all the studies were performed for a stationary position of egg during thermal process. So far, no works have been published on the pasteurization of egg in a rotation mode. Hence, the present study was aimed at investigating the effects of pasteurization of egg at 55.6 degrees C on pasteurization time. Rotation mode of pasteurization decreases the time of pasteurization by a large extent and makes more energy efficient process. Hence, it is advantageous for food industries to adopt rotation as an additional operation during pasteurization of eggs to produce high quality intact eggs without affecting its functional properties.
机译:鸡蛋含有许多营养成分,在世界范围内都被消费。巴氏杀菌是灭活病原细菌的重要单元操作,已广泛用于灭活沙门氏菌肠炎沙门氏菌。在55.6摄氏度下对鸡蛋进行热巴氏灭菌进行了实验研究和计算流体力学(CFD)模拟。在这项研究中,温度预测的CFD模拟通过对无蛋黄的鸡蛋中的温度进行实验测量得到了验证。验证后,在CFD中以两种不同的模式(静止和旋转(2.5和5 rpm))对整个鸡蛋(带有蛋黄)进行了模拟。这些结果表明,静止的蛋大约需要30分钟才能达到巴氏灭菌温度,而旋转的蛋仅需要9.5分钟。加工时间的减少最大程度地减少了鸡蛋营养物质的热损伤。因此,鸡蛋的旋转使热巴氏灭菌过程更有效。此外,预测iS灭活。 基于过程值F(min)的肠炎也增强了热巴氏灭菌过程中旋转的积极作用。行业意义:近年来,CFD在食品加工业务中的应用得到了快速发展。巴氏杀菌CFD分析的主要需求是确定鸡蛋中均匀有效的热量分布,并检查最慢加热区(SHZ)的位置。关于CFD在鸡蛋热处理中的应用的相关文献很少。但是,所有研究都是在热加工过程中对鸡蛋的静止位置进行的。迄今为止,尚未发表关于以旋转方式对鸡蛋进行巴氏杀菌的著作。因此,本研究旨在研究蛋在55.6摄氏度下进行巴氏杀菌对巴氏杀菌时间的影响。巴氏灭菌的旋转模式在很大程度上减少了巴氏灭菌的时间,并提高了能源效率。因此,对于食品工业来说,在蛋的巴氏灭菌过程中采用旋转作为附加操作以生产高质量的完整蛋而不影响其功能特性是有利的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号