【24h】

Arthroscopic Talar Dome Access Using a Standard Versus Wire-Based Traction Method for Ankle Joint Distraction

机译:关节镜下的塔拉尔穹顶进入使用标准对基于钢丝的牵引方法进行踝关节牵引

获取原文
获取原文并翻译 | 示例
           

摘要

Purpose: To evaluate the accessibility of the talar dome through anterior and posterior portals for ankle arthroscopy with the standard noninvasive distraction versus wire-based longitudinal distraction using a tensioned wire placed transversely through the calcaneal tuberosity. Methods: Seven matched pairs of thigh-to-foot specimens underwent ankle arthroscopy with 1 of 2 methods of distraction: a standard noninvasive strapping technique or a calcaneal tuberosity wire-based technique. The order of the arthroscopic approach and use of a distraction method was randomly determined. The areas accessed from both 2-portal anterior and 2-portal posterior approaches were determined by using a molded translucent grid. Results: The mean talar surface accessible by anterior ankle arthroscopy was comparable with noninvasive versus calcaneal wire distraction with 57.8% +/- 17.2% (range, 32.9% to 75.7%) versus 61.5% +/- 15.2% (range, 38.5% to 79.1%) of the talar dome, respectively (P = .590). The use of calcaneal wire distraction significantly improved posterior talar dome accessibility compared with noninvasive distraction, with 56.4% +/- 20.0% (range, 14.4% to 78.0%) versus 39.8% +/- 14.9% (range, 20.0% to 57.6%) of the talar dome, respectively (P = .031). Conclusions: Under the conditions studied, our cadaveric model showed equivalent talar dome access with 2-portal anterior arthroscopy of calcaneal wire-based distraction versus noninvasive strap distraction, but improved access for 2-portal posterior arthroscopy with calcaneal wire-based distraction versus noninvasive strap distraction. Clinical Relevance: The posterior 40% of the talar dome is difficult to access via anterior ankle arthroscopy. Posterior calcaneal tuberosity wire-based longitudinal distraction improved arthroscopic access to the centro-posterior talar dome with a posterior arthroscopic approach.
机译:目的:通过标准的无创牵引术与通过横向穿过跟骨结节放置的张力钢丝进行的基于钢丝的纵向牵引,评估踝关节镜通过前,后门通过距骨穹顶的可及性。方法:对七对匹配的大腿至脚部标本进行踝关节镜检查,并采用以下两种分心方法中的一种:标准无创绑扎技术或跟骨结节钢丝技术。随机确定关节镜方法的顺序和分散方法的使用。通过使用模制的半透明网格确定从2门前路和2门后路进入的区域。结果:前踝关节镜可接近的距骨平均表面与无创与跟骨线牵引相当,分别为57.8%+/- 17.2%(范围32.9%至75.7%)和61.5%+/- 15.2%(范围38.5%至38.5%)。距骨穹顶分别占79.1%(P = .590)。跟无创牵引相比,跟骨线牵引术显着改善了距后距骨穹顶的可及性,分别为56.4%+/- 20.0%(范围14.4%至78.0%)和39.8%+/- 14.9%(范围20.0%至57.6%)距距穹顶)(P = .031)。结论:在所研究的条件下,我们的尸体模型显示了跟骨金属丝牵引术与无创性带牵引的二门前关节镜的距骨穹顶入路,但跟骨金属丝牵引术与无创性带在二门后关节镜的入路得到了改善分心。临床意义:距后穹%的40%难以通过前踝关节镜检查进入。后方跟骨结节钢丝基于纵向牵张,通过后关节镜方法改善了关节镜下向后距骨距骨的接近。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号