...
首页> 外文期刊>Applied optics >Microphysical particle parameters from extinction and backscatter lidar data by inversion with regularization: experiment
【24h】

Microphysical particle parameters from extinction and backscatter lidar data by inversion with regularization: experiment

机译:通过正则化反演从消光和后向散射激光雷达数据中获得的微物理粒子参数:实验

获取原文
获取原文并翻译 | 示例

摘要

We present effective radius, volume, surface-area, and number concentrations as well as mean complex refractive index of tropospheric particle size distributions based on lidar measurements at six wavelengths. The parameters are derived by means of an inversion algorithm that has been specifically designed for the inversion of available optical data sets. The data were taken on 20 June and on 20 July 1997 during the Aerosol Characterization Experiment ACE 2 (North Atlantic/Portugal) and on 9 August 1998 during the Lindenberg Aerosol Characterization Experiment LACE 98 (Lindenberg/Germany). Measurements on 20 June 1997 were taken in a clean-marine boundary layer, and a large value of 0.64 μm for the effective radius, a low value of 1.45 for the real part, and a negligible imaginary part of the complex refractive index were found. The single-scatter albedo was 0.98 at 532 nm. It was derived from the particle parameters with Mie-scattering calculations. In contrast, the particles were less than 0.2 μm in effective radius in a continental-polluted aerosol layer on 20 July 1997. The real part of the complex refractive index was ~1.6; the imaginary part showed values near 0.03i. The single-scatter albedo was 0.84. On 9 August 1998 an elevated particle layer located from 3000 to 6000 m was observed, which had originated from an area of biomass burning in northwestern Canada. Here the effective radius was ~0.24 μm, the real part of the complex refractive index was above 1.6, the imaginary part was ~0.04i, and the single-scatter albedo was 0.81. Excellent agreement has been found with results based on sunphotometer and in situ measurements that were performed during the field campaigns.
机译:我们基于六个波长的激光雷达测量结果,给出了有效的半径,体积,表面积和数量浓度,以及对流层粒径分布的平均复折射率。这些参数是通过一种反演算法得出的,该演算法专门设计用于对可用光学数据集进行反演。数据是在ACE 2气溶胶表征实验(北大西洋/葡萄牙)于1997年6月20日和1997年7月20日,在LACE 98的Lindenberg气溶胶表征实验在1998年8月9日(德国Lindenberg)获得的。 1997年6月20日在干净的海洋边界层进行了测量,发现有效半径的最大值为0.64μm,实部的最小值为1.45,复折射率的虚部可以忽略。单散射反射率在532 nm处为0.98。它是通过米氏散射计算从粒子参数得出的。相比之下,1997年7月20日,在一个被大陆污染的气溶胶层中,这些粒子的有效半径小于0.2μm。复折射率的实部为〜1.6;虚部显示值接近0.03i。单散射反照率为0.84。 1998年8月9日,观察到一个高的颗粒层,位于加拿大西北部的一个燃烧生物质的区域,高度在3000至6000 m之间。在这里,有效半径为〜0.24μm,复折射率的实部为1.6以上,虚部为〜0.04i,单散射反照率为0.81。在野战期间进行的基于日光光度计和原位测量的结果已发现极好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号