首页> 外文期刊>Applied thermal engineering: Design, processes, equipment, economics >A comparison of particulate emission for rapeseed oil methyl ester, palm oil methyl ester and soybean oil methyl ester in perspective of their fatty ester composition
【24h】

A comparison of particulate emission for rapeseed oil methyl ester, palm oil methyl ester and soybean oil methyl ester in perspective of their fatty ester composition

机译:菜籽油甲酯,棕榈油甲酯和大豆油甲酯颗粒排放的脂肪酯组成比较

获取原文
获取原文并翻译 | 示例
       

摘要

Three different kinds of biodiesel blended with baseline diesel fuel in 50% v/v were tested in a Cummins 4BTA direct injection diesel engine, with a turbocharger and an intercooler. Experiments were conducted under five engine loads of two steady speeds. The aim of this study is to identify the effects of fatty ester composition in the particulate emission of biodiesel from different feedstocks. The smoke opacity of SME50 (Soybean oil methyl ester) is higher than that of RME50 (Rapeseed oil methyl ester) and PME50 (Palm oil methyl ester). There is no obvious relationship between total unsaturate fraction and smoke opacity, while smoke opacity is linear with polyunsaturate fraction of fuel at all test modes, which means that the unsaturated ester with two or three double bonds have greater influence in smoke formation than the counterpart with only one double bond. The SOF (soluble organic fraction) proportion of RME50, PME50 and SME50 is 5 times or 4 times larger than that of diesel fuel and ultra-low-sulfur diesel respectively. The overall sequence of SOF is PME50 > SME50 > RME50. SOF fraction is linear with saturate fraction of fuel at all test modes. PME50 has higher nucleation particle number concentration than that of RME50 and SME50. Same with SOF, the increase in total nucleation number concentration depends on saturate fraction of fuel at all test modes. Thus, the feedstocks and composition of biodiesel could be selected and optimized during production process in order to improve the emission conditions of biodiesel. (C) 2015 Elsevier Ltd. All rights reserved.
机译:在具有涡轮增压器和中冷器的康明斯4BTA直喷柴油机中测试了三种以50%v / v与基准柴油燃料混合的生物柴油。实验是在两个稳定转速的五种发动机负载下进行的。这项研究的目的是确定脂肪酸酯成分对不同原料生物柴油颗粒排放的影响。 SME50(豆油甲酯)的烟气不透明度高于RME50(菜籽油甲酯)和PME50(棕榈油甲酯)。在所有测试模式下,总不饱和分数与烟气的不透明度之间没有明显的关系,而烟气的不透明度与燃料的多不饱和分数是线性的,这意味着具有两个或三个双键的不饱和酯对烟气的影响要大于不饱和度。只有一个双键。 RME50,PME50和SME50的SOF(可溶性有机部分)比例分别是柴油和超低硫柴油的5倍或4倍。 SOF的总体顺序为PME50> SME50> RME50。在所有测试模式下,SOF分数与燃料的饱和分数呈线性关系。 PME50的成核颗粒数浓度高于RME50和SME50。与SOF一样,在所有测试模式下,总成核数浓度的增加取决于燃料的饱和分数。因此,可以在生产过程中选择和优化生物柴油的原料和组成,以改善生物柴油的排放条件。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号