首页> 外文期刊>Applied thermal engineering: Design, processes, equipment, economics >Thermal performance calculation and analysis of heat transfer tube in super open rack vaporizer
【24h】

Thermal performance calculation and analysis of heat transfer tube in super open rack vaporizer

机译:超开式机架蒸发器传热管的热性能计算与分析

获取原文
获取原文并翻译 | 示例
           

摘要

As one of the most widely-used liquefied natural gas (LNG) vaporizer, super open rack vaporizer (SuperORV) consists of panel-shaped heat transfer tubes with duplex tube configuration. In this paper, an energy balance-based distributed parameter model for predicting the thermal performance of SuperORV heat transfer tube was developed, where introduces numerous empirical correlations. The results from the model exhibit a good agreement with the experimental data, which implies the calculation model is reliable. Based on this, the heat transfer process of SuperORV heat transfer tube was simulated numerically, the bulk fluid and metal temperature profiles along the heat transfer tube was obtained at the condition with ice formation and heat transfer enhancement measures, the thermal performance of SuperORV heat transfer tube was analyzed, and the effects of operating parameters and heat transfer enhancement measures on the thermal performance were discussed. The results show that the operating parameters have important effects on the thermal performance of heat transfer tube, and the heat transfer enhancement measures can improve the heat transfer performance markedly. The required minimum tube length while both inner fin and twisted tape insert were applied is shortened by 60% compared with that without heat transfer enhancement measures. (C) 2015 Elsevier Ltd. All rights reserved.
机译:作为最广泛使用的液化天然气(LNG)蒸发器之一,超级开放式蒸发器(SuperORV)由具有双管结构的面板形传热管组成。本文建立了基于能量平衡的分布式参数模型来预测SuperORV传热管的热性能,并引入了许多经验相关性。模型结果与实验数据吻合良好,说明计算模型可靠。在此基础上,对SuperORV换热管的传热过程进行了数值模拟,得出了在有结冰和传热增强措施的条件下,SuperORV换热器沿传热管的整体流体温度和金属温度曲线。分析了管子,并讨论了操作参数和传热增强措施对热性能的影响。结果表明,运行参数对传热管的热性能有重要影响,强化传热措施可以显着提高传热性能。与不采用传热增强措施的情况相比,同时应用内部散热片和扭曲带插入物时所需的最小管长缩短了60%。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号