...
首页> 外文期刊>American Journal of Sports Medicine >Neurovascular anatomic relationships to arthroscopic posterior and transseptal portals in different knee positions
【24h】

Neurovascular anatomic relationships to arthroscopic posterior and transseptal portals in different knee positions

机译:与膝关节不同位置的关节镜后和跨隔门脉的神经血管解剖关系

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Background: No study exists that directly measures the distances between posterior portals and the popliteal artery under arthroscopic conditions. Purpose: To define the anatomic relationship between the neural structures and standard posterior arthroscopic portals and between the popliteal artery and posterior as well as transseptal portals in different knee positions. Study Design: Descriptive laboratory study. Methods: Seventeen fresh-frozen cadaveric knees were used. The posterolateral, posteromedial, and transseptal portals were established at 90° of knee flexion. The popliteal artery was revealed using a shaver placed through the posteromedial portal. The distance from those portals to the popliteal artery was measured using a precision caliper. After the measurements were made, each specimen was dissected. The distance from a needle, blade, and cannula in each portal site to the adjacent neural structures was successively measured at 30°, 90°, and 120° of knee flexion. Results: The mean distance (in millimeters) from the posterolateral, posteromedial, and transseptal portals to the popliteal artery was significantly smaller at 30° (32.1 ± 4.6, 36.5 ± 4.9, and 9.0 ± 3.9, respectively) than at 90° (40.7 ± 5.1, 41.0 ± 3.8, and 18.0 ± 3.8, respectively) and 120° (38.4 ± 4.8, 38.7 ± 6.0, and 21.0 ± 4.0, respectively) of knee flexion. The mean distance from the posterolateral portal to the common peroneal nerve at 90° of flexion (needle, 26.6 ± 9.5; blade, 24.7 ± 6.9; cannula, 22.1 ± 6.9) was significantly greater than the distance at 30° (needle, 23.4 ± 6.5; blade, 21.4 ± 6.4; cannula, 18.4 ± 6.3) and 120° (needle, 21.8 ± 6.6; blade, 19.1 ± 6.3; cannula, 17.4 ± 6.7) of knee flexion. The mean distance between the posteromedial portal and the inferior infrapatellar branch of the saphenous nerve at 30° (needle, 18.6 ± 4.3; blade, 15.5 ± 3.3; cannula, 13.7 ± 5.8) of flexion was smaller than at 90° (needle, 20.1 ± 6.1; blade, 16.5 ± 5.3; cannula, 14.3 ± 4.4) and 120° (needle, 21.1 ± 3.6; blade, 17.7 ± 4.9; cannula, 15.1 ± 5.9) of flexion, but there was no statistical significance. The mean distance from the posteromedial portal to the sartorial branch of the saphenous nerve at 30° (needle, 22.8 ± 6.1; blade, 19.8 ± 5.3; cannula, 17.7 ± 6.2) of flexion was significantly smaller than that at 90° (needle, 29.7 ± 3.6; blade, 26.3 ± 6.3; cannula, 23.1 ± 4.7) and 120° (needle, 31.5 ± 3.9; blade, 28.9 ± 4.1; cannula, 25.4 ± 5.1) of flexion. Conclusion/Clinical Relevance: The position of 90° of knee flexion is safe to establish posterior and transseptal arthroscopic portals. The position of 120° of knee flexion is practically safe to establish posteromedial and transseptal portals, but it is unsafe to create a posterolateral portal because the risk of damaging the common peroneal nerve is high. The position of 30° of knee flexion is not recommended to establish posterior arthroscopic portals.
机译:背景:目前尚无研究在关节镜下直接测量后门与the动脉之间的距离。目的:定义不同膝盖位置的神经结构与标准后关节镜门之间以及the动脉与后门和经隔门之间的解剖关系。研究设计:描述性实验室研究。方法:使用十七只新鲜冷冻的尸体膝盖。后外侧,后内侧和跨中隔门在屈膝90°时建立。用剃须刀穿过后内侧门露出revealed动脉。使用精密卡尺测量从这些门到to动脉的距离。在进行测量之后,解剖每个样品。在膝关节屈曲30°,90°和120°的位置上,连续测量从每个门脉部位的针,刀片和套管到相邻神经结构的距离。结果:从后外侧,后内侧和跨隔门到to动脉的平均距离(以毫米为单位)在90°(分别为32.1±4.6、36.5±4.9和9.0±3.9)时明显小于90°(40.7)膝关节屈曲度分别为±5.1、41.0±3.8和18.0±3.8)和120°(分别为38.4±4.8、38.7±6.0和21.0±4.0)。屈曲90°时从后外侧门到腓总神经的平均距离(针,26.6±9.5;刀片,24.7±6.9;套管,22.1±6.9)显着大于30°(针,23.4± 6.5;刀片为21.4±6.4;套管为18.4±6.3)和120°(膝盖为21.8±6.6;刀片为19.1±6.3;套管为17.4±6.7)。屈曲30°(针,18.6±4.3;刀片,15.5±3.3;插管,13.7±5.8)时,后内侧门与隐神经下and下分支之间的平均距离小于90°(针,20.1) ±6.1;刀片,16.5±5.3;套管,14.3±4.4)和120°(针,21.1±3.6;刀片,17.7±4.9;套管,15.1±5.9)屈曲,但无统计学意义。从后内侧门到隐神经的剑状分支在30°(针,22.8±6.1;刀片,19.8±5.3;套管,17.7±6.2)屈曲的平均距离显着小于在90°(针, 29.7±3.6;刀片:26.3±6.3;套管,23.1±4.7)和120°(针,31.5±3.9;刀片,28.9±4.1;套管,25.4±5.1)屈曲。结论/临床意义:膝关节屈曲90°的位置可安全地建立后路和经隔的关节镜门。膝关节屈曲120°的位置在建立后内侧和跨中部门脉时实际上是安全的,但是创建后外侧门脉是不安全的,因为会损伤腓总神经的风险很高。不建议将膝关节屈曲30°的位置来建立后关节镜检查门。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号