...
首页> 外文期刊>Nanoscale >Absolute photoluminescence quantum yields of IR26 and IR-emissive Cd1-xHgxTe and PbS quantum dots - method- and material-inherent challenges
【24h】

Absolute photoluminescence quantum yields of IR26 and IR-emissive Cd1-xHgxTe and PbS quantum dots - method- and material-inherent challenges

机译:IR26和IR-IR-AR-AL-SY-XHGXTE和PBS量子点的绝对光致发光量子产率 - 方法和材料的挑战

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Bright emitters with photoluminescence in the spectral region of 800-1600 nm are increasingly important as optical reporters for molecular imaging, sensing, and telecommunication and as active components in electrooptical and photovoltaic devices. Their rational design is directly linked to suitable methods for the characterization of their signal-relevant properties, especially their photoluminescence quantum yield (Phi(f)). Aiming at the development of bright semiconductor nanocrystals with emission >1000 nm, we designed a new NIR/IR integrating sphere setup for the wavelength region of 600-1600 nm. We assessed the performance of this setup by acquiring the corrected emission spectra and Phi(f) of the organic dyes Itrybe, IR140, and IR26 and several infrared (IR)-emissive Cd1-xHgxTe and PbS semiconductor nanocrystals and comparing them to data obtained with two independently calibrated fluorescence instruments absolutely or relative to previously evaluated reference dyes. Our results highlight special challenges of photoluminescence studies in the IR ranging from solvent absorption to the lack of spectral and intensity standards together with quantum dot-specific challenges like photobrightening and photodarkening and the size-dependent air stability and photostability of differently sized oleate-capped PbS colloids. These effects can be representative of lead chalcogenides. Moreover, we redetermined the Phi(f) of IR26, the most frequently used IR reference dye, to 1.1 x 10(-3) in 1,2-dichloroethane DCE with a thorough sample reabsorption and solvent absorption correction. Our results indicate the need for a critical reevaluation of Phi(f) values of IR-emissive nanomaterials and offer guidelines for improved Phi(f) measurements.
机译:在800-1600 nm的光谱区域中具有光致发光的明亮发射器越来越重要,作为用于分子成像,传感和电信的光学报告,以及电流和光伏设备中的活性成分。它们的理性设计直接与合适的信号相关特性(尤其是其光致发光量子产率(PHI(f))表征的合适方法相关联。旨在开发具有发射> 1000 nm的明亮半导体纳米晶体,我们设计了一个新的NIR/IR整合球体设置,为600-1600 nm的波长区域设计。我们通过获取有机染料ITRYBE,IR140和IR26的校正发射光谱和PHI(f)以及几个Infrared(ir) - 电压CD1-XHGXTE和PBS半导体纳米晶体和将其与数据进行比较,并将其与获得的数据进行比较,从而评估了这种设置的性能。两种独立校准的荧光仪器绝对或相对于先前评估的参考染料。我们的结果突出了IR范围从溶剂吸收到缺乏光谱和强度标准的IR范围内的光致发光研究的特殊挑战,以及量子点特异性的挑战,例如光透度和光电标记,以及尺寸依赖的空气稳定性以及不同尺寸的Oleate限制的Oleate PBS的光稳定性胶体。这些作用可以代表墨西哥乳素化剂。此外,我们重新确定了最常用的IR参考染料IR26的PHI(F),在1,2-二氯乙烷DCE中使用了1.1 x 10(-3),并具有彻底的样品重吸收和溶剂吸收校正。我们的结果表明,需要重新评估IR释放性纳米材料的PHI值(F)值,并为改进PHI(F)测量的指南提供指南。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号