首页> 外文期刊>ACS applied materials & interfaces >Morphology Control in Films of Isoindigo Polymers by Side-Chain and Molecular Weight Effects
【24h】

Morphology Control in Films of Isoindigo Polymers by Side-Chain and Molecular Weight Effects

机译:侧链和分子量效应中靛蓝聚合物薄膜形态控制

获取原文
获取原文并翻译 | 示例
       

摘要

The performance of devices relying on organic electronic materials; such as organic field-effect transistors (OFET) and organic photovoltaics (OPV), is strongly correlated to the morphology of the conjugated material in thin films. For instance; several factors such as polymer solubility, weak intermolecular forces between polymers and fullerene derivatives, and film drying time impact phase separation in the active layer of a bulk heterojunction OPV device. In an effort to probe the influence of polymer assembly on morphology of polymer thin films and phase separation with fullerene derivatives; five terthiophene-alt-isoindigo copolymers were synthesized with alkyl side-chains of varying lengths and branching on the terthiophene unit. These P[T3(R)-iI] polymers were designed to have similar optoelectronic properties but different solubilities in o-dichlorobenzene and were predicted to have different tendencies for crystallization. All polymers with linear alkyl chains exhibit similar thin film morphologies as investigated by grazing-incidence wide-angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM). The main differences in electronic and morphological properties arise when P[T3(R)-iI] is substituted with branched 2-ethylhexyl (2EH) side-chains. The bulky 2EH substituents lead to a blue-shifted absorption, a lower ionization potential, and reduced ordering in polymer thin filins. The five P[T3-iI] derivatives span hole mobilities from 1.5 X 10(-3) to 2.8 X 10(-2) cm(2) V-1 s(-1) in OFET devices. In OPV devices, the 2EH-substituted explained by the large phase separation observed by AFM in blends of P[T3(2EH)-iI] with PC71BM. In these P[T3(R)-iI] systems, the propensity for the polymers to self-assemble prior to aggregation of PC71BM molecules was key to achieving fine phase separation and increased short-circuit currents, eventually resulting in power conversion efficiencies of 5% in devices processed using a single solvent.
机译:依靠有机电子材料的装置的性能;例如有机场效应晶体管(OFET)和有机光伏(OPV),与薄膜中的共轭材料的形态强烈相关。例如;聚合物溶解度,聚合物和富勒烯衍生物之间的弱分子力等若干因素,以及在本体异质结OPV器件的活性层中膜干燥时间冲击相分离。努力探讨聚合物组装对聚合物薄膜形态的影响,用富勒烯衍生物相分离;用不同长度的烷基侧链合成五次噻吩 - Alt-IsoIndigo共聚物,并在萜烯单元上分支。这些P [T3(R)-II]聚合物被设计成具有类似的光电性质,但在O-二氯苯中的不同溶解度,预计具有不同的结晶趋势。具有线性烷基链的所有聚合物表现出类似的薄膜形态,如通过放牧发生宽角X射线散射(Giwaxs)和原子力显微镜(AFM)研究。当p [t3(r)-ii]被支链2-乙基己基(2eh)侧链被取代时,出现电子和形态学性质的主要差异。庞大的2EH取代基导致蓝色偏移吸收,较低的电离电位,并在聚合物薄丝丝中降低排序。五个P [T3-II]衍生物在OFET装置中的1.5×10(-3)至2.8×10(-2)cm(2)V-1 s(-1)中的孔迁移率。在OPV器件中,由AFM与PC71BM的P [T3(2eh)-ii]的共混物观察到的大相分离解释的2eh-取代。在这些P [T3(R)-II]系统中,聚合物在PC71BM分子聚集之前对自组装的倾向是实现精细相分离和增加的短路电流的关键,最终导致5的电力转换效率使用单个溶剂处理的设备中的%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号