首页> 外文期刊>ACS applied materials & interfaces >Mixed Metal Phosphide Chainmail Catalysts Confined in N-Doped Porous Carbon Nanoboxes as Highly Efficient Water-Oxidation Electrocatalysts with Ultralow Overpotentials and Tafel Slopes
【24h】

Mixed Metal Phosphide Chainmail Catalysts Confined in N-Doped Porous Carbon Nanoboxes as Highly Efficient Water-Oxidation Electrocatalysts with Ultralow Overpotentials and Tafel Slopes

机译:混合金属磷化物链脂催化剂限制在N掺杂的多孔碳纳米氧氧氧氧氧氧氧化物中,作为高效的水氧化电气催化剂,具有超级环绕和Tafel斜坡

获取原文
获取原文并翻译 | 示例
           

摘要

Electrocatalytic hydrogen production driven by surplus electric energies is considered a promising sustainable process for hydrogen supply. The high overpotential and low energy-conversion efficiency caused by the slow kinetics of the four-electron transfer oxygen-evolution reaction (OER), however, hamper its competitiveness. Herein, a highly stable, efficient OER catalyst was developed, taking the effects of both composition and nanostructure into account for the catalyst design. N-doped carbon-armored mixed metal phosphide nanoparticles confined in N-doped porous carbon nanoboxes, a particle-in-box nanostructure, were synthesized from monodisperse Ni-3[Fe(CN)(6)](2)center dot H2O nanocubes through sequential conformal polydopamine coating, ammonia etching, and thermal phosphorization. The product exhibited outstanding catalytic abilities for the OER in 1.0 M KOH, delivering 10, 100, and 250 mA/cm(2) at ultrasmall overpotentials of 203, 242, and 254 mV, respectively, with an ultrasmall Tafel slope of 38 mV/dec, outperforming most recently reported top-notch iron-group-based OER catalysts. The long-term stability was also excellent, showing a small chronopotentiometric decay of 2.5% over a 24 h operation at 50 mA/cm(2). The enhanced catalytic efficiency and stability may be attributable to the unique particle-in-box structure as a nanoreactor offering a local, fast reaction environment, the conductive N-doped porous carbon shell for fast charge and mass transport, the synergistic effect between multicomponent metal phosphides for enhanced intrinsic activities, and the carbon protection layer to prevent/delay the catalyst core from being deactivated. This combined particle-in-box and chainmail design concept for electrocatalysts is unique and advantageous and may be readily applied to the general field of heterogeneous reactions.
机译:通过剩余电能驱动的电催化氢气产生被认为是氢气供应的有希望的可持续工艺。然而,由四电子转移氧 - 进化反应(OER)缓慢动力学引起的高过电位和低能量转换效率妨碍其竞争力。在此,开发出高度稳定的高效oer催化剂,以催化剂设计考虑组合物和纳米结构的影响。由单分散Ni-3 [Fe(CN)(6)](2)中心点H2O纳米孔(2)中央点H2O纳米孔(2)中心纳米孔(2)中心纳米孔(2)中心纳米孔(2)中心纳米孔(2)中央纳米孔(2)中心纳米孔(2)中心纳米孔(2)中纳米孔(2)中央通过连续的共形聚德米胺涂层,氨蚀刻和热磷化。该产物在203,242和254mV的超大电压上,在203,242和254mV的超燃烧室中,在1.0M KOH中的oer催化能力出现出色的催化能力,分别为38mV / DEC,优于最近报告的基于铁基的oer催化剂。长期稳定性也优异,在50mA / cm(2)下,在24小时内,显示出2.5%的小计时计衰减。增强的催化效率和稳定性可归因于独特的粒子盒结构,作为提供局部,快速反应环境,导电N掺杂多孔碳壳的纳米反应器,用于快速充电和大规模运输,多组分金属之间的协同效应磷化磷酸化的内在活性和碳保护层,以防止/延迟催化剂核心被停用。电催化剂的这种组合的粒子和链饲料设计概念是独特的,有利的,并且可以容易地应用于异质反应的一般领域。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号