...
首页> 外文期刊>CERAMICS INTERNATIONAL >Piezoelectric and dielectric properties of Pb0.93La0.02Sr0.05(Zr0.52Ti0.48)O-3 ceramics doped with Li2CO3 at low sintering temperature
【24h】

Piezoelectric and dielectric properties of Pb0.93La0.02Sr0.05(Zr0.52Ti0.48)O-3 ceramics doped with Li2CO3 at low sintering temperature

机译:PB0.93LA0.02SR0.05(Zr0.52Ti0.48)的压电和介电性能(Zr0.52Ti0.48)O-3陶瓷在低烧结温度下掺杂Li 2 CO3

获取原文
获取原文并翻译 | 示例
           

摘要

Pb0.93La0.02Sr0.05(Zr0.52Ti0.48)O-3 (PLSZT) ceramics were successfully doped with various amounts of Li2CO3. The effect of Li2CO3 as sintering aid on crystallization process of PLSZT ceramic was also determined by thermal analysis (TGA/DTA). As the amount of Li2CO3 increased from 0.1 to 1 mol%, the sintering temperature was found to decrease from 1150 to 850 degrees C. Li2CO3 addition improved the densification and increased the average grain size. XRD data revealed the formation of single perovskite phase in all compositions. The effects of Li+ doping on the piezoelectric and dielectric properties of PLSZT ceramics were also investigated in which the piezoelectric and dielectric properties were found to be enhanced with the increase in Li+ content. The best piezoelectric and dielectric properties were obtained for 0.7 mol% Li2CO3 with rho=7.421 g/cm(3), KP = 0.46, d(33)=259 (pC/N), epsilon(r)=1270, and tan delta=0.0847.
机译:PB0.93LA0.02SR0.05(ZR0.52TI0.48)O-3(PLSZT)陶瓷成功掺杂各种量的Li 2 CO 3。 通过热分析(TGA / DTA)确定Li2CO3作为烧结工艺的烧结助剂的效果。 随着Li 2 CO 3的量从0.1升至1摩尔%,发现烧结温度从1150℃降至850℃。Li 2 CO 3添加改善致密化并增加平均晶粒尺寸。 XRD数据显示所有组合物中的单钙钛矿相的形成。 还研究了Li +掺杂对PLSZT陶瓷压电和介电性质的影响,其中发现压电和电介质性能随着Li +含量的增加而增强。 获得0.7mol%Li 2 CO 3的最佳压电和介电性能,rho = 7.421g / cm(3),kp = 0.46,d(33)= 259(pc / n),ε(r)= 1270,以及tan delta = 0.0847。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号