In-situ formation of Fe3O4 and ZrO2 coated Fe-based soft magnetic composites by hydrothermal method

摘要

In this paper, the soft magnetic composite was prepared using a powder metallurgy method with the Fe3O4 and ZrO2 co-coated iron powder which was synthesized though the in-situ hydrothermal method. Energy dispersive spectroscopy (EDS) coupled with X-ray photoelectron spectroscopy (XPS) revealed that the Fe3O4 and ZrO2 were uniformly coated on the surface of iron powders. The addition of ZrO2 in the coating effectively improves the properties of the soft magnetic composite. ZrO2 can further improve the insulating properties, and enhance the thermostability of the coating simultaneously which will lead to resistivity increase and eddy current loss decrease. By controlling the additive amount of zirconium cation and annealing temperature, high magnetic induction of 1.002 T (measured at 8000 A/m), relatively high permeability of 83 (measured at 100 kHz), and low total core loss of 255.2 W/kg (measured at 100 kHz and 50 mT) were achieved. The Fe@ZrO2&Fe3O4 SMCs show high electrical resistivity and saturation induction, which may be widely used in high speed electric motor, transformer, inductance and switching power supply.