首页> 外文期刊>Analog Integrated Circuits and Signal Processing >Enhanced active feedback technique with dynamic compensation for low-dropout voltage regulator
【24h】

Enhanced active feedback technique with dynamic compensation for low-dropout voltage regulator

机译:具有动态补偿功能的增强型主动反馈技术,适用于低压差稳压器

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents a novel frequency compensation technique for a low-dropout (LDO) voltage regulator. Enhanced active feedback frequency compensation is employed to improve the frequency response. The proposed LDO is capable of providing high stability for current loads up to 150 mA with or without loading capacitors. The proposed LDO voltage regulator provides a loop bandwidth of 7.8 MHz under light loads and 6.5 MHz under heavy loads. The maximum undershoot and overshoot are 59 and 90 mV, respectively, for changes in load current within a 200-ns edge time, while the compensation capacitors only require a total value of 7 pF. This enables easy integration of the compensation capacitors within the LDO chip. The proposed LDO regulator was designed using TSMC 0.35-μm CMOS technology. With an active area of 0.14 mm~2 (including feedback resistors), the quiescent current is only 40 μA. The input voltage ranges from 1.73 to 5 V for a loading current of 150 mA and an output voltage of 1.5 V. The main advantage of this approach is the stability of the LDO circuit when external load capacitors are connected, or even without load capacitors.
机译:本文提出了一种用于低压差(LDO)稳压器的新型频率补偿技术。采用增强的有源反馈频率补偿来改善频率响应。所建议的LDO能够在有或没有负载电容器的情况下为高达150 mA的电流负载提供高稳定性。拟议的LDO稳压器在轻载时提供7.8 MHz的环路带宽,在重载时提供6.5 MHz的环路带宽。对于在200 ns边沿时间内负载电流的变化,最大下冲和过冲分别为59和90 mV,而补偿电容器只需要总值为7 pF的电容。这使LDO芯片内的补偿电容器易于集成。拟议的LDO稳压器是使用TSMC0.35-μmCMOS技术设计的。有效面积为0.14 mm〜2(包括反馈电阻),静态电流仅为40μA。对于150 mA的负载电流和1.5 V的输出电压,输入电压的范围为1.73至5V。这种方法的主要优点是当连接外部负载电容器甚至没有负载电容器时LDO电路的稳定性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号