首页> 外文期刊>ACS applied materials & interfaces >Nucleophilic Polymers and Gels in Hydrolytic Degradation of Chemical Warfare Agents
【24h】

Nucleophilic Polymers and Gels in Hydrolytic Degradation of Chemical Warfare Agents

机译:亲核聚合物和凝胶在化学战剂的水解降解中的作用

获取原文
获取原文并翻译 | 示例
       

摘要

Water- and solvent-soluble polymeric materials based on polyalkylamines modified with nucleophilic groups are introduced as catalysts of chemical warfare agent (CWA) hydrolysis. A comparative study conducted at constant pH and based on the criteria of the synthetic route simplicity, aqueous solubility, and rate of hydrolysis of CWA mimic, diisopropylfluorophosphate (DFP), indicated that 4-aminopyridine-substituted polyallylamine (PAAm-APy) and polyvinylamine substituted with 4-aminopyridine (PVAm-APy) were advantageous over 4-pyridinealdoxime-modified PVAm and PAAm, poly(butadiene-co-pyrrolidinopyridine), and PAAm modified with bipyridine and its complex with Cu(II). The synthesis of PVAm-APy and PAAm-APy involved generation of a betaine derivative of acrylamide and its covalent attachment onto the polyalkylamine chain followed by basic hydrolysis. Hydrogel particles of PAAm-APy and PVAm-APy cross-linked by epichlorohydrin exhibited pH-dependent swelling and ionization patterns that affected the rate constants of DFP nucleophilic hydrolysis. Deprotonation of the aminopyridine and amine groups increased the rates of the nucleophilic hydrolysis. The second-order rate of nucleophilic hydrolysis was 5.5- to 10-fold higher with the nucleophile-modified gels compared to those obtained by cross-linking of unmodified PAAm, throughout the pH range. Testing of VX and soman (GD) was conducted in 2.5-3.7 wt % PVAm-APy suspensions or gels swollen in water or DMSO/water mixtures. The half-lives of GD in aqueous PVAm-APy were 12 and 770 min at pH 8.5 and 5, respectively. Addition of VX into 3.5-3.7 wt % suspensions of PVAm-APy in DMSO-d(6) and D2O at initial VX concentration of 0.2 vol % resulted in 100% VX degradation in less than 20 min. The unmodified PVAm and PAAm were 2 orders of magnitude less active than PVAm-APy and PAAm-APy, with VX half-lives in the range of 24 h. Furthermore, the PVAm-APy and PAAm-APy gels facilitated the dehydrochlorination reaction of sulfur mustard (HD) and its analogue 2-chloroethyl ethylsulfide (CEES). The ability of the reported aminopyridine-modified polyalkylamine materials to degrade the most persistent of CWAs, coupled with aqueous solubility, and the presence of numerous amino groups that provide convenient "handles" for covalent attachment on polymeric and inorganic supports yields promise for applications such as protective fabric and textile treatment and components of decontaminating materials.
机译:引入基于亲核基团改性的聚烷基胺的水溶性和水溶性聚合物材料,作为化学战剂(CWA)水解的催化剂。在恒定pH值和基于合成路线简单性,水溶性和CWA模拟物二异丙基氟磷酸酯(DFP)的水解速率的标准下进行的比较研究表明,4-氨基吡啶取代的聚烯丙胺(PAAm-APy)和聚乙烯胺取代用4-氨基吡啶(PVAm-APy)取代4-吡啶吡啶肟修饰的PVAm和PAAm,聚(丁二烯-共-吡咯烷二吡啶)和用联吡啶修饰的PAAm及其与Cu(II)的配合物是有利的。 PVAm-APy和PAAm-APy的合成涉及丙烯酰胺的甜菜碱衍生物的生成及其共价连接到聚烷基胺链上,然后进行碱性水解。通过表氯醇交联的PAAm-APy和PVAm-APy的水凝胶颗粒表现出pH依赖性的溶胀和电离模式,影响DFP亲核水解的速率常数。氨基吡啶和胺基的去质子化增加了亲核水解的速率。在整个pH范围内,与通过未修饰的PAAm交联获得的亲和性相比,使用亲核剂修饰的亲和性凝胶的二级亲和水解速率高5.5至10倍。 VX和梭曼(GD)的测试是在水或DMSO /水混合物中膨胀的2.5-3.7 wt%PVAm-APy悬浮液或凝胶中进行的。 GD在PVAm-APy水溶液中的半衰期在pH值为8.5和5时分别为12分钟和770分钟。在初始VX浓度为0.2 vol%的情况下,将VX添加到3.5-3.7 wt%的PVAm-APy在DMSO-d(6)和D2O中的悬浮液中,导致VX在不到20分钟的时间内降解100%。未修饰的PVAm和PAAm的活性比PVAm-APy和PAAm-APy低2个数量级,VX半衰期为24小时。此外,PVAm-APy和PAAm-APy凝胶促进了芥子气(HD)及其类似物2-氯乙基乙基硫化物(CEES)的脱氯化氢反应。报道的氨基吡啶修饰的聚烷基胺材料具有降解最持久的CWA的能力,以及水溶性,以及众多的氨基,它们为在聚合物和无机载体上共价连接提供方便的“手柄”,为诸如以下应用提供了希望防护织物和纺织品的处理以及去污材料的成分。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号