...
首页> 外文期刊>Journal of Ceramic Science and Technology >Effect of Alkali Concentration and Reaction Time on the Morphology of ZnO Nano-Microparticles Prepared by Hydrothermal Method
【24h】

Effect of Alkali Concentration and Reaction Time on the Morphology of ZnO Nano-Microparticles Prepared by Hydrothermal Method

机译:碱浓度和反应时间对水热法制备ZnO纳米微粒形态的影响

获取原文
获取原文并翻译 | 示例
           

摘要

A low-temperature hydrothermal method was used to prepare ZnO nano-microparticles using surfactant-free solutions. The effect of the alkali concentration (Zn~(2+)/OH~ = 1:1,1:2,1:4 and 1:8) and reaction time (1,2 and 3 hours) on the morphology of the ZnO was studied. The structure and the morphology of the ZnO obtained were investigated by means of XRD and SEM techniques, respectively. The results revealed that the solution basicity and reaction time were important factors affecting the morphology. With an increase in the reaction time, the crystallinity of the phases formed was enhanced. At a low alkali concentration, i.e. 1:1, a ZnO hexagonal prism-like structure with a crystal size of 300 nm-1.5 μim and Zn(OH)2 amorphous phase were formed. With a further increase to Zn~(2+)/OH~-=1:2, some nanorods and flakes appeared beside the ZnO nanoparticles. When the ratio reached Zn~(2+)/OH~ = 1:4, different morphologies such as nanorods, slices and nanoflakes were obtained. At Zn~(2+)/OH~-= 1:8, the morphology changed into microflowers as the major structure with some nanoparticles and nanosheets as the minor structure.
机译:使用低温水热法使用无表面活性剂溶液制备ZnO纳米微粒。碱浓度(Zn〜(2 +)/ OH〜= 1:1,1:2,1:4和1:8)的影响,以及ZnO的形态的反应时间(1,2和3小时)研究过。通过XRD和SEM技术研究了所得ZnO的结构和形态。结果表明,求解碱度和反应时间是影响形态学的重要因素。随着反应时间的增加,增强了形成的相的曲面的结晶度。在低碱浓度下,即1:1,形成具有300nm-1.5μm和Zn(OH)2非晶相的晶粒尺寸的ZnO六方棱镜状结构。进一步增加到Zn〜(2 +)/ OH〜 - = 1:2,一些纳米棒和薄片出现在ZnO纳米颗粒旁边。当该比率达到Zn〜(2 +)/ OH〜= 1:4时,获得不同的形态,如纳米棒,切片和纳米薄物。在Zn〜(2 +)/ OH〜 - = 1:8时,形态变成微射线作为主要结构与一些纳米粒子和纳米片作为次要结构。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号