AbstractKCl-induced high-temperature corrosion behavior of four HVAF-sprayed Ni-based coatings (Ni21Cr'/> KCl-Induced High-Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air
首页> 外文期刊>Journal of Thermal Spray Technology >KCl-Induced High-Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air
【24h】

KCl-Induced High-Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air

机译:KCL诱导的HVAF喷涂的Ni基涂层的高温腐蚀行为在环境空气中

获取原文
获取原文并翻译 | 示例
           

摘要

AbstractKCl-induced high-temperature corrosion behavior of four HVAF-sprayed Ni-based coatings (Ni21Cr, Ni5Al, Ni21Cr7Al1Y and Ni21Cr9Mo) under KCl deposit has been investigated in ambient air at 600?°C up to 168?h. The coatings were deposited onto 16Mo3 steel—a widely used boiler tube material. Uncoated substrate, 304L and Sanicro 25 were used as reference materials in the test environment. SEM/EDS and XRD techniques were utilized to characterize the as-sprayed and exposed samples. The results showed that the small addition of KCl significantly accelerated degradation to the coatings. All coatings provided better corrosion resistance compared to the reference materials. The alumina-forming Ni5Al coating under KCl deposit was capable of forming a more protective oxide scale compared to the chromia-forming coatings as penetration of Cl through diffusion paths was hindered. Both active corrosion and chromate formation mechanisms were found to be responsible for the corrosion damages. The corrosion resistance of the coatings based on the microstructure analysis and kinetics had the following ranking (from the best to worst): Ni5Al?>?Ni21Cr?>?Ni21Cr7Al1Y?>?Ni21Cr9Mo.]]>
机译:<![cdata [ <标题>抽象 ara id =“par1”> Kcl诱导四HVAF的高温腐蚀行为在KCl沉积物下在环境空气中在600Ω℃下研究了在KCl沉积物下进行了喷雾的Ni基涂层(Ni21cr,Ni5Al,Ni21Cr7Al1Y和Ni21Cr7Al1Y和Ni21Cr9mO,高达168Ω·℃。将涂层沉积在16mO3钢 - 一种广泛使用的锅炉管材料上。未涂覆的底物,304L和SANICO 25用作测试环境中的参考材料。使用SEM / EDS和XRD技术用于表征喷涂和暴露的样品。结果表明,KCL的少量添加到涂层中显着加速降解。与参考资料相比,所有涂层提供更好的耐腐蚀性。与铬形成涂层相比,在KCl沉积物下形成氧化铝的Ni5Al涂层能够以染色的涂层相比,通过阻止Cl通过扩散路径渗透。发现有源腐蚀和铬酸盐形成机制都是负责腐蚀损伤的原因。基于微观结构分析和动力学的涂层的耐腐蚀性具有以下排名(从最佳到最差):Ni5Al?>?ni21cr?>?ni21cr7al1y?> ni21cr9mo。 ]]>

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号