A New Method for Eyring Shear-Thinning Models in Elliptical Contacts Thermal Elastohydrodynamic Lubrication

摘要

A new method for solving the shear stress and the effective viscosity of Eyring shear-thinning fluid in thermal elastohydrodynamic lubrication (EHL) was proposed and applied to two models. Model 1 is the thermal EHL model with one-direction velocity, and model 2 is the spinning thermal EHL model in which the velocity varies with coordinates. Comparisons between the new and the existing method were carried out. Results show that only replacing the shear strain rate of model 1 with that of model 2, the shear stress and the effective viscosity of model 2 for Eyring shear-thinning fluid can be obtained. For model 1, results obtained with the two methods are the same. The new method can be qualified and applied into model 2. It is proved that the new method has higher efficiency for shear-thinning fluid than the existing method. Therefore, the new method is more efficient and can be used for spinning Eyring shear-thinning thermal EHL.