首页> 外文期刊>Journal of Materials Engineering and Performance >Fracture Toughness of Z3CN20.09M Cast Stainless Steel with Long-Term Thermal Aging
【24h】

Fracture Toughness of Z3CN20.09M Cast Stainless Steel with Long-Term Thermal Aging

机译:Z3CN20.09M的断裂韧性铸造不锈钢,长期热老化

获取原文
获取原文并翻译 | 示例
           

摘要

Accelerated thermal aging tests were performed at 400 A degrees C for nearly 18,000 h on Z3CN20.09M cast stainless steel which was used for primary coolant pipes of nuclear power plants. A series of Charpy impact tests were conducted on Z3CN20.09M after different long-term thermal aging time. The test results indicated that the Charpy impact energy of Z3CN20.09M cast stainless steel decreased rapidly at an early stage and then almost saturated after thermal aging of 10,000 h. Furthermore, J-resistance curves were measured for CT specimens of longitudinal and circumferential pipe orientations. It showed that there was no obvious difference in the fracture characteristics of Z3CN20.09M in different sampling directions. In addition, the observed stretch zone width (SZW) revealed that the value of initiation fracture toughness J (SZW) was significantly lower than that of fracture toughness J (IC), indicating a low actual crack initiation energy due to long-term thermal aging.
机译:加速的热老化试验在400℃下进行,在Z3CN20.09M铸造不锈钢上以400℃进行近18,000小时,用于核电厂的原发性冷却剂管。 在不同的长期热老化时间后,在Z3CN20.09M上进行了一系列夏比冲击试验。 试验结果表明,Z3CN20.09M铸造不锈钢的夏比冲击能量在早期阶段迅速下降,然后在10,000小时的热老化后几乎饱和。 此外,测量纵向和周向管道取向的CT标本的j抗性曲线。 结果表明,不同采样方向Z3CN20.09M的断裂特性没有明显的差异。 此外,观察到的拉伸区宽度(SZW)揭示了起始断裂韧性J(SZW)的值显着低于断裂韧性J(IC)的值,这表明由于长期热老化引起的低实际裂纹启动能量 。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号