Synthesis of a Cationic Polymer-Bentonite Composite Utilizing a Simple and Green Process for the Adsorption of Acid Orange 7 from Aqueous Solution

摘要

A one-step, green process is reported for synthesis of poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride) (PMETAC) modified bentonite (Bent-PMETAC). The Bent-PMETAC was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Zeta potential, scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). The results indicated that large amounts of PMETAC were successfully grafted on the surface and interlayers of bentonite, and changed the Zeta potential of the sample from negative to positive. Acid Orange 7 (AO 7), as adsorbate, was used to test the anionic dye adsorption of the samples. The batch adsorption results implied that this novel Bent-PMETAC adsorbent exhibited a much higher removal (95%) of AO 7 than bentonite (10%). In addition, the adsorption process was hardly influenced by pH, which is in good agreement with the results of the Zeta potential analysis. The equilibrium adsorption isotherms and the adsorption kinetics of AO 7 fitted well to the Langmuir model and pseudo-second-order kinetic model, respectively. The maximum adsorption capacity of AO 7 onto Bent-PMETAC was 208.6 mg center dot g(-1) at 298 K, which is much higher than for most other materials. Overall, the results indicated the Bent-PMETAC is a low-cost, simple synthesis and highly efficient adsorbent for anionic dye removal from aqueous solutions.