...
首页> 外文期刊>High performance polymers >The effect of crystallization properties influenced by 2-methyl-1,3-propanediol units on the optical properties of modified poly(ethylene terephthalate)
【24h】

The effect of crystallization properties influenced by 2-methyl-1,3-propanediol units on the optical properties of modified poly(ethylene terephthalate)

机译:将2-甲基-1,3-丙二醇单元对改性聚(乙二醇酯)的光学性质影响的结晶性能影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

In this study, the preparation and properties of poly(ethylene terephthalate-co-2-methyl-1,3-propanediol) copolyester (PEMT) were reported. The PEMT crystallization properties, optical properties, thermal properties, rheological properties, and other properties were characterized by nuclear magnetic resonance (H-1 NMR), differential scanning calorimetry, thermo gravimetric analysis, ultraviolet visible near-infrared (UV-VIS-NIR) spectroscopy, polarizing microscope crystal culture, X-ray diffraction (XRD), and rheometer. It was proved that the crystallization abilities and crystallization rate of PEMT copolyesters were significantly affected by the content of 2-methyl-1,3-propanediol (MPO) units; the copolyester becomes amorphous when the content of MPO units exceeded 20 mol%. According to the XRD data, the diffraction peaks of PEMT remained unchanged compared with those of poly(ethylene terephthalate). The transmittance of copolyesters displayed a tendency of increasing at first and then declining with the increase in MPO. In addition to the crystallization properties, the transmittance of copolyesters was also affected by the extent of yellowing. When the MPO addition was less than 20 mol%, PEMT can maintain good thermal decomposition performance and processability.
机译:在该研究中,报道了聚(乙二醇酯-CO-2-甲基-1,3-丙二醇)共聚酯(PEMT)的制备和性质。通过核磁共振(H-1 NMR),差示扫描量热法,热重分析,紫外线可见近红外(UV-Vis-NIR)以核磁共振(H-1 NMR),光学性质,热性能,流变性能和其他性能表征了光学性质,光学性质,流变性能和其他性质。光谱,偏振显微镜晶体培养,X射线衍射(XRD)和流变仪。事实证明,PEMT共聚酯的结晶能力和结晶速率受到2-甲基-1,3-丙二醇(MPO)单位的含量的显着影响;当MPO单位的含量超过20mol%时,共聚酯变得无定形。根据XRD数据,与聚(对苯二甲酸乙二醇酯)相比,PEMT的衍射峰保持不变。共聚酯的透射率在首先显示出增加的趋势,然后随着MPO的增加而下降。除了结晶性能之外,共聚酯的透射率也受到了泛黄程度的影响。当MPO添加小于20摩尔%时,PEMT可以保持良好的热分解性能和加工性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号