首页> 外文期刊>Pervasive and Mobile Computing >Node placement for connected target coverage in wireless sensor networks with dynamic sinks
【24h】

Node placement for connected target coverage in wireless sensor networks with dynamic sinks

机译:具有动态宿的无线传感器网络中连接目标覆盖的节点放置

获取原文
获取原文并翻译 | 示例
           

摘要

Target coverage and connectivity are two fundamental and critical issues in wireless sensor networks. The former is for providing sufficient monitoring quality where all points of interest in the network are covered by sensor nodes. The latter is for guaranteeing satisfactory communicating capability where all sensor nodes can connect to at least one sink via nodes (i.e., sensor nodes and relay nodes). Though considerable efforts have been devoted to optimize the placement of sensor nodes and relay nodes under connected target coverage constraint (i.e., guaranteeing both target coverage and connectivity), all of the existing works in this area address only networks with one static sink. In the meanwhile, although there are many works in literature considered the networks with dynamic sinks, none of them studies how to optimize the location of sensor and relay nodes. In this article, we focus on wireless sensor networks with dynamic sinks, which consist of multiple sinks and the sinks' positions may change periodically, and study how to place a minimum number of nodes for connected target coverage. Specifically, we decompose the problem into two sub-problems. The first one, named as target coverage problem, is to place sensor nodes for covering all targets. The second one, named as network connectivity problem, is for placing relay nodes to connect sensor nodes to the sinks. We first formulate the target coverage problem under an integer linear programming model and present an exact algorithm to determine the optimal solution. We then propose a constant-approximation algorithm based on partitioning and shifting scheme. For the network connectivity problem, we first prove its NP-hardness and then propose two approximation algorithms. The first one exploiting the minimum group Steiner tree to minimize the placed relay nodes, while the second one is a time-efficient algorithm based on clustering and spanning tree approaches. The experiment results show the superiority of our proposed algorithms in terms of both the number of the required nodes and the time complexity. (C) 2019 Elsevier B.V. All rights reserved.
机译:目标覆盖和连接是无线传感器网络中的两个基本和关键问题。前者用于提供足够的监控质量,其中网络中的所有感兴趣点被传感器节点覆盖。后者用于保证令人满意的通信能力,其中所有传感器节点都可以通过节点(即传感器节点和中继节点)连接到至少一个接收器。尽管已经致力于优化连接目标覆盖约束下的传感器节点和中继节点的放置(即,保证目标覆盖率和连接),但该区域中所有现有的工作只有一个静态接收器的网络。同时,虽然文学中有许多作品被认为是具有动态汇的网络,但它们都没有研究如何优化传感器和中继节点的位置。在本文中,我们专注于具有动态沉积的无线传感器网络,该动态宿者包括多个水槽,并且水槽的位置可以周期性地改变,并研究如何为连接的目标覆盖提供最小数量的节点。具体而言,我们将问题分解为两个子问题。第一个名称为目标覆盖问题的第一个是放置用于覆盖所有目标的传感器节点。第二个被命名为网络连接问题,用于将中继节点放置到接收器到接收器。我们首先在整数线性编程模型下制定目标覆盖问题,并提出了一个精确的算法来确定最佳解决方案。然后,我们提出了一种基于分区和移位方案的恒定近似算法。对于网络连接问题,我们首先证明其NP硬度,然后提出两个近似算法。第一个利用最小组静止树以最小化放置的继电器节点,而第二个是基于聚类和生成树方法的时间效率算法。实验结果在所需节点的数量和时间复杂度方面表明了我们所提出的算法的优越性。 (c)2019年Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号