首页> 外文期刊>Transactions of the ASABE >Improvements and Evaluation of an In-Field Bin Filler for Apple Bruising and Distribution
【24h】

Improvements and Evaluation of an In-Field Bin Filler for Apple Bruising and Distribution

机译:苹果瘀伤和分布局部箱填料的改进与评价

获取原文
获取原文并翻译 | 示例
           

摘要

Automatic bin filling is needed for apple harvest and in-field sorting. A commercially viable bin filler for infield use should be simple, compact, low in cost, and be able to distribute apples evenly in the bin without causing bruising damage. An innovative bin filling technology was developedfor incorporation with the new apple harvest and infield sorting machine recently developed by our group. Field tests of the first version of the bin filler in the 2016 harvest season showed relatively high bruising rates and uneven fruit distributions. Subsequently, a second version of the bin filler was developed with several major improvements. A new pair of foam rollers for better control of apples exiting the sorting system and avoiding fruit collisions during free falling was added below the sorter. An improved pinwheel with nine longer soft pads, instead offour short pads as in the original version, was installed for better fruit distribution. Foam guides, attached to the long pads, reduced the rollingspeed of fruit from the pads into the bin. Field tests conducted in the 2017 harvest season showed that the second, improved version of the bin filler achieved superior performance in reducing bruise damage, with 99% of 'Gala' apples and 98% 'Blondee' of apples graded Extra Fancy. Furthermore, a depth imaging method, using a Kinect-v2 camera, was proposed to quantitatively compare the performance of the two bin fillers for distribution offruit in the bin under uniform and non-uniform feeding conditions. Analysis of the fruit height data showed that the apple distributions were not significantly affected by feeding method for both bin fillers. Overall, the second version of the bin filler resulted in better distributions of apples in the bin, comparedto the first version, and uneven distributions mainly occurred in the corners of the bin, which could not be reached by the bin filler's pinwheel. The improved bin filler meets the requirements for apple harvest and in-field sorting, and it has potentialfor use with other harvest platforms.
机译:Apple收获和现场排序需要自动箱填充。用于infield使用的商业上可行的箱填料应简单,紧凑,成本低,并且能够在垃圾箱中均匀地分配苹果,而不会导致伤害损坏。开发了一种创新的垃圾箱填充技术,并于最近由我们的集团开发的新的Apple Harvest和Infife分拣机的融合。 2016年收获季节箱填料的第一个版本的现场测试表明瘀伤率相对较高,果实分布不均匀。随后,使用几种主要改进开发了第二个版本的箱填料。在分拣机下方加入了一种新的一对泡沫辊,用于更好地控制退出分拣系统的苹果,避免在自由落体中避免果实碰撞。安装了九个较长软垫的改进的轮车,而是安装了原始版本的短垫,以获得更好的水果分布。泡沫引导件连接到长垫上,将果实从垫子延伸到垃圾箱中。在2017年收获季节进行的现场测试表明,箱填料的第二个改进版本在减少瘀伤损伤方面取得了卓越的性能,其中99%的“盛拉的苹果”和98%的“Blondee”的苹果评分额外花哨。此外,提出了一种使用Kinect-V2相机的深度成像方法,以定量比较两个箱填料在均匀和不均匀的喂养条件下在箱中分配衬垫的性能。果实高度数据的分析表明,通过箱填料的进料方法没有显着影响Apple分布。总的来说,箱填料的第二个版本导致箱中的苹果在箱中的更好分布,与第一个版本相比,箱的角落主要发生在垃圾箱的角落里,这是垃圾箱的轮车无法到达。改进的箱填料符合Apple收获和现场排序的要求,它具有与其他收获平台一起使用。

著录项

  • 来源
    《Transactions of the ASABE》 |2019年第2期|共10页
  • 作者

    Z. Zhang; A. K. Pothula; R. Lu;

  • 作者单位

    Research Agricultural Engineer and Research Leader USDA-ARS Sugarbect and Bean Research Unit East Lansing Michigan;

    Research Agricultural Engineer and Research Leader USDA-ARS Sugarbect and Bean Research Unit East Lansing Michigan;

    Research Agricultural Engineer and Research Leader USDA-ARS Sugarbect and Bean Research Unit East Lansing Michigan;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 农业科学;
  • 关键词

    3D imaging; Apple; Bin filling; Bruising; Harvest; Sorting;

    机译:3D成像;苹果;垃圾箱;瘀伤;收获;排序;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号