首页> 外文期刊>The Canadian Journal of Chemical Engineering >Incorporating sepiolite and kaolinite to improve the performance of SPEEK composite membranes for proton exchange membrane fuel cells
【24h】

Incorporating sepiolite and kaolinite to improve the performance of SPEEK composite membranes for proton exchange membrane fuel cells

机译:掺入Sepiolite和高岭石,以改善Proton交换膜燃料电池的Speek复合膜的性能

获取原文
获取原文并翻译 | 示例
           

摘要

SPEEK polymer based thermally crosslinked polymer membranes are prepared by sol-gel synthesis using kaolinite and sepiolite clays as additives. Characterization tests, ie, mechanical stability, thermal gravimetric analysis, ion exchange capability, swelling properties, water uptake capacities, electrochemical impedance spectroscopy analysis, and Fourier transform infrared spectroscopy (FTIR) analysis of the membranes were conducted. The sepiolite and kaolinite addition enhanced the thermal stability and the thermal crosslinking reduced the swelling capacity of the synthesized membranes. Proton conductivity results were increased from 0.172 to 0.268 S cm(-1) by adding 9% of kaolinite, and to 0.329 S cm(-1) at 80 degrees C by adding 9% of sepiolite to the SPEEK membrane's polymer structure. The fuel cell current density and potential measurements of 141 mA cm(-2) and 84.6 mW cm(-2) were found respectively at 0.6 V for the SPEEK/S9 membrane, whereas values of 600 mA cm(-2) and 348 mW cm(-2) were found for the Nafion commercial membrane.
机译:Speek聚合物基的热交联聚合物膜通过使用高岭石和海泡石粘土作为添加剂来制备溶胶 - 凝胶合成制备。进行表征试验,即机械稳定性,热重分析,离子交换能力,膨胀性,水吸收能力,电化学阻抗光谱分析和傅立叶变换的红外光谱(FTIR)分析对膜的表征。 Sepiolite和高岭石添加增强了热稳定性,热交联降低了合成膜的溶胀容量。通过在80℃下加入9%的海泡石到Speek膜的聚合物结构,通过加入0.172至0.268Scm(-​​1),将质子电导率结果从0.172℃增加到0.172至0.268 s cm(-1)。分别在0.6V下为Speek / S9膜发现141mA cm(-2)和84.6mW cm(-2)的燃料电池电流密度和潜在测量值,而600 mA cm(-2)和348 mW的值发现了Nafion商业膜的cm(-2)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号