Lansoprazole 3 mg/mL Suspension Many clinical gastroenterologic situations require the use of a liquid oral formulation.

摘要

Calculate the quantity of each ingredient for the amount to be prepared. Accurately weigh or measure each ingredient. Hold the neck of the bottle containing the lansoprazole powder and tap the bottom edges on a hard surface to loosen the powder. Remove the cap from the bottle. Tap the top of the induction seal liner to loosen any powder adhering to the liner. Carefully and slowly peel back the inner foil seal liner from the bottle. Using the enclosed tool, scrape any lansoprazole powder from the seal into the bottle. Using the smaller end of the tool, with firm strength loosen any powder from the inside lower edges of the bottle. It is important to ensure that no lansoprazole powder remains trapped in the inside lower edges of the bottle. Again using the tool, distribute the lansoprazole powder evenly over the bottom surface of the bottle. Shake the FIRST-PPI Suspension bottle for a few seconds. Open the FIRST-PPI Suspension bottle and empty about one-half of its contents into the lansoprazole powder bottle. Replace the cap and shake the lansoprazole powder bottle for approximately 60 seconds. Shake vigorously.