首页> 外文期刊>Progress in Artificial Intelligence >leInfluence of synthesis conditions on physico-chemical and photocatalytic properties of rare earth (Ho, Nd and Sm) oxides
【24h】

leInfluence of synthesis conditions on physico-chemical and photocatalytic properties of rare earth (Ho, Nd and Sm) oxides

机译:稀土(HO,ND和SM)氧化物物理化学和光催化性能的合成条件的衡量

获取原文
获取原文并翻译 | 示例
           

摘要

Three different rare earth metal (samarium, neodymium and holmium) oxides were synthesized by adapting organic and inorganic routes. The influence of synthesis route over the physico-chemical characteristics of the rare earth metal oxides was studied using X-ray diffraction, FT-IR, thermogravimetric analysis, microscopy (FESEM and HRTEM), N2physisorption and diffusive reflective ultraviolet-visible spectroscopy techniques. The XRD, electron microscopy and N2-physisorption results indicated that the samples synthesized by organic route possessed smaller crystallite/particle size and high surface area with macro size pores compared to the samples synthesized by inorganic route. The synthesis conditions also influenced the morphology of the samples. The samples synthesized by organic route possessed sheets like morphology with large spaces in between the sheets, in contrast highly agglomerated particles were observed in case of samples synthesized by inorganic route. All the synthesized rare earth oxides were utilized as photocatalysts for degradation of crystal violet dye under visible light irradiation. The samples synthesized by organic route exhibited high photocatalytic efficiencies. Samarium oxide synthesized using organic route offered the superior photocatalytic performance as this sample possessed low band gap energy, high surface area, pore volume and presence of surface reactive -OH groups. In addition, the synthesized rare earth metal oxide catalysts exhibited excellent recyclability for photocatalytic crystal violet degradation. (C) 2019 The Authors. Published by Elsevier B.V.
机译:通过适应有机和无机途径来合成三种不同的稀土金属(钐,钕和钬)氧化物。使用X射线衍射,FT-IR,热重分析,显微镜(FESEM和HRTEM),N2Phosishion和扩散反射紫外 - 可见光谱技术研究了对稀土金属氧化物的物理化学特性对稀土金属氧化物的物理化学特性的影响。 XRD,电子显微镜和N2-物理化结果表明,与通过无机途径合成的样品相比,通过有机途径合成的样品具有较小的微晶/粒度和高表面积,与宏观尺寸的孔隙。合成条件也影响了样品的形态。在通过无机途径合成的样品的情况下,观察到由片材之间的具有大空间的有机路线合成的片材与形态相同的片材。所有合成的稀土氧化物都被用作光催化剂,用于在可见光照射下晶体紫染料降解。由有机途径合成的样品表现出高光催化效率。使用有机路线合成的钐氧化物提供了优异的光催化性能,因为该样品具有低带隙能量,高表面积,孔隙体积和表面反应性-OH基团的存在。此外,合成的稀土金属氧化物催化剂表现出光催化晶体紫降解的优异再循环性。 (c)2019年作者。 elsevier b.v出版。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号