Experimental research on the behaviour of eccentrically loaded SRC columns subjected to the ISO-834 standard fire including a cooling phase

摘要

This paper presents an experiment study of the post-fire behavior of five SRC columns under combination of axial eccentrical loading and fire. The experiment phenomena and mechanical response of the SRC column specimens during experiment, specifically loading, heating, cooling and post-fire loading were observed. The residual load bearing capacity, failure modes and vertical deformation were studied. With the test program, the effects of parameters such as the load ratio, the fire duration time and the steel ratio were studied. It is shown that the effects of temperature delay become more obvious with the increase of the depth from the heated surface. Some of the SRC column specimens failed during the cooling phase. For other specimens residual deformations were observed when the furnace temperature decreased to ambient temperature. The influence of some parameters including the load ratio, the fire duration time and the steel ratio on the post-fire load bearing capacities was discussed. It can be concluded that the residual load bearing capacity of the SRC columns decreases with the increase of the fire duration time and the load ratio, and increases with the increase of the steel ratio. Finally, a finite-element analysis model was developed to simulate the behavior of the tested SRC columns.