首页> 外文期刊>Rubber Chemistry and Technology >FURTHER EVIDENCE OF FILLER-FILLER MECHANICAL ENGAGEMENT IN RUBBER COMPOUNDS FILLED WITH SILICA TREATED BY LONG-CHAIN SILANE
【24h】

FURTHER EVIDENCE OF FILLER-FILLER MECHANICAL ENGAGEMENT IN RUBBER COMPOUNDS FILLED WITH SILICA TREATED BY LONG-CHAIN SILANE

机译:进一步证据填充有二氧化硅的橡胶化合物中的填充填料机械接合的综合证据,由长链硅烷处理

获取原文
获取原文并翻译 | 示例
           

摘要

The present study discusses that filler filler mechanical engagement resulting from the grafted long-chain silanes on the silica surface is indeed a reinforcing mechanism in rubber composites, as already speculated by nonlinear viscoelastic properties in our previous study. The existence and severity of such a phenomenon are assessed purely by isolating the energetic contribution of reinforcement from interfering with filler mechanical engagement in the silica network formation and breakdown processes. In a novel approach, the driving force of fillers to flocculate energetically at elevated temperatures was defined using surface energy theories, and it was adjusted to be similar in two composites having silica treated by short and long-chain silanes. Filler filler mechanical engagement was monitored by tracking network formation (filler flocculation) in a matrix of styrene butadiene rubber and also by conducting various dynamic viscoelastic experiments on liquid paraffin suspensions having short-and long-chain silica of similar surface energy. Results consistently confirmed the existence of mechanical engagement between silica particles having the long-chain silane in both rubber compounds and paraffin suspensions. The results may find applications in the rolling resistance of tires, for example, where stabilization of the filler network by displacing the peak energy dissipation of the network breakdown from applied service strains to larger values would be of technical importance.
机译:本研究讨论了由二氧化硅表面上接枝的长链硅烷引起的填充填料机械接合确实是橡胶复合材料中的增强机构,如我们先前的研究中的非线性粘弹性性质已经推测。这种现象的存在性和严重程度是纯粹的评估通过隔离增强从硅藻网络形成和击穿过程中干扰填充机械接合的能量贡献来评估。在一种新方法中,使用表面能理论定义填料在高温下使升高在升高的温度下的填充物的驱动力,并且在具有短链和长链硅烷处理的二氧化硅的两种复合材料中调节其相似。通过在苯乙烯丁二烯橡胶基质中跟踪网络形成(填充絮凝)并通过在具有类似表面能的短链和长链二氧化硅的液体石蜡悬浮液上进行各种动态粘弹性实验来监测填料填充机械接合。结果一致地证实存在在橡胶化合物和石蜡悬浮液中具有长链硅烷的二氧化硅颗粒之间的机械接合。结果可以在轮胎的滚动阻力中找到应用,例如,通过将网络击穿的峰值能量耗散从应用的服务群体转移到更大的值来说是技术重要性的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号