Experimental study on leveling mechanism for material-jetting-type color 3D printing

摘要

Purpose The material-jetting-type (MJ) 3-D printing technology has advantages in resolution and color printing. During the printing process, a leveling technique is needed to precisely control the thickness and flatness of each layer. Roller-type leveling mechanism has been adopted in commercial MJ 3-D printers, but it is lack of research on roller leveling process parameters and establishing experimental procedures. Therefore, in this study, a roller-type leveling mechanism for a MJ color 3 D printer was developed, and experimental approaches were utilized to determine process parameters. Design/methodology/approach The roller-type leveling mechanism was chosen to provide functions of flattening and removal of excess material. The parameters studied were roller speed and rotational direction. Surface roughness, Ra, of printed single-layered specimens was measured at 15 locations for plane roughness and along five lines for line roughness to evaluate the leveling results. Adopting suitable parameters, color samples with and without leveling were printed for comparison and verification. Findings According to plane roughness results, forward rotation achieved better leveling. Plane roughness was the major criteria to determine roller speed with the assistance of standard deviation of line roughness. The best parameters of the self-developed MJ color 3-D printer were found to be rolling forward at 1,100 rpm. In addition, printed color samples showed great improvement in surface roughness with leveling and no obvious color mixing after leveling.