Mineralogical transformations of spodumene concentrate from Greenbushes, Western Australia. Part 2: Microwave heating

摘要

Spodumene in its natural ot-spodumene modification is a refractory silicate interlocking lithium species. Therefore, in order to effectively extract the lithium, its alteration to the less densely packed 13spodumene modification is necessary. The current method used for the conversion to p-spodumene is calcination at 950-1100 degrees C using conventional heating. However this is an energy intensive approach. The use of microwave irradiation as an alternative, potentially less energy intensive, method of heating is examined in this work. Spodumene concentrate was obtained from Greenbushes, Western Australia, and subjected to (i) direct and (ii) hybrid microwave heating. The results showed that spodumene concentrate is transparent to direct microwave irradiation. However, using hybrid heating, to preheat the sample, it was found that once heated to above 634 degrees C by conventional heating, the alpha-spodumene irradiated with microwaves undergoes rapid localised conversion into gamma- and beta-spodumene, which in a matter of seconds forms a beta-spodumene product in either sintered or melted form, depending on the treatment time and relative heat loss from the system. The process appears to involve an exothermic conversion of alpha-spodumene to gamma-spodumene, followed by endothermic formation of beta-spodumene. It was found that the critical temperature for microwave absorption by beta-spodumene is lower than that for ot-spodumene by 190 degrees C. Calculations of energy input suggested that the energy consumed to produce the sintered product could be much less than the energy required to convert a- to y- and pspodumene in a muffle furnace. These findings could help commercial plant operators and researchers to develop an industrial calcination process utilising microwave energy. Crown Copyright (C) 2016 Published by Elsevier Ltd. All rights reserved.