Suppressing heating rate-dependent martensitic stabilization in ductile Cu-Al-Mn shape memory alloys by Ni addition: An experimental and first-principles study

摘要

The present paper aims to suppress the heating rate-dependent martensitic stabilization of ductile Cu-Al-Mn shape memory alloys through restricting the mobility and thus the behavior of vacancies. A combined study based on first-principles calculation and experimental results were presented to unveil the effect of Ni addition into ternary Cu-Al-Mn alloys on the bonding force between atoms. The results showed that additional nearest neighbor bond between Ni and Al atoms in quaternary Cu-Al-Mn-Ni alloys can be produced. The addition of Ni (= 2 at.%) into ternary Cu-Al-Mn alloys can not only efficiently increase the shape memory effect, but also suppress the occurrence of heating rate-dependent martensitic stabilization. The addition of 2 at.% Ni improved the shape memory effect of ternary Cu-Al-Mn alloys from 85% to 92% when heated at 20 k/min. The shape memory effect of ternary Cu-Al-Mn alloys dropped to 10% as the heating rate decreased to 1 K/min, but it remain at 92% even when the heating rate was sufficiently lowered to 0.01 K/min after the addition of 2 at.% Ni.