首页> 外文期刊>Engineering Geology >Improving precision in regional scale numerical simulations of groundwater flow into underground openings
【24h】

Improving precision in regional scale numerical simulations of groundwater flow into underground openings

机译:基于地下开口地下水流量的区域规模数值模拟提高

获取原文
获取原文并翻译 | 示例
           

摘要

Dewatering is a common engineering practice to secure the accessibility during the construction and operational phases of tunnels. It is thus important to accurately estimate the amount of groundwater flow into underground openings for the design and safe operation of tunnels. Numerical models need to be used to estimate groundwater flow into openings for given heterogeneity and regional hydrologic boundary conditions typically by assuming that the atmospheric pressure is maintained along open wall faces. As the scale of openings can be small as tens of centimeters, while models need to incorporate the regional hydrologic conditions, it is often practically impossible to explicitly represent the three-dimensional (3D) geometry of openings within numerical models. For the safety assessment of deep geological repositories of spent nuclear fuels, for example, complex configurations and geometry of various tunnels such as construction, access, ventilation, and deposition tunnels often need to be approximated as one-dimensional (1D) lines in 3D models. The application of a simple Dirichlet boundary condition along a set of tunnel nodes may yield inaccurate solutions due to geometric simplifications and coarse discretization. This study derives an appropriate boundary condition that can be applied to 1D tunnel segments to improve the accuracy when simulating inflow into openings. A third-type tunnel boundary condition is suggested to correct the difference between known wall pressure and the pressure simulated at tunnel nodes. Improvement in the precision of the solutions is demonstrated by comparing the numerical solutions using the new boundary condition with analytic solutions, and with numerical solutions when the 3D tunnel geometry is explicitly simulated. It is also shown that the formulation can be easily extended to incorporate the high permeability excavation damaged zone and the low permeability grouted zone in the tunnel vicinity. The applicability of the tunnel boundary condition is demonstrated using an example of a hypothetical deep geologic repository system consisting of various types of tunnels located in a hypothetical crystalline coastal aquifer.
机译:脱水是一种普遍的工程实践,可以在隧道的建设和运营阶段确保可访问性。因此,重要的是要准确地估计地下水流入地下开口,用于隧道的设计和安全操作。通常通过假设沿着开口壁面保持大气压,通常需要用于估计地下水进入给定的异质性和区域水文边界条件的开口。随着开口的规模可以小于几十厘米,而模型需要包含区域水文条件,通常实际上是不可能明确表示数值模型内的开口的三维(3D)几何形状。对于废核燃料深层地质储存库的安全评估,例如,各种隧道的复杂配置和几何形状,如构造,访问,通风和沉积隧道,通常需要在3D模型中近似为一维(1D)线。沿着一组隧道节点的简单Dirichlet边界条件的应用可以产生由于几何简化和粗略分散化而产生不准确的解决方案。该研究产生了适当的边界条件,该边界条件可以应用于1D隧道段,以提高在将流入到开口流入开口时提高精度。建议三型隧道边界条件校正已知壁压和在隧道节点上模拟的压力之间的差异。通过使用具有分析解决方案的新边界条件的数值解决方案对数值解决方案进行比较,并在明确模拟3D隧道几何形状时,通过对解决方案的精度提高。还表明,可以容易地扩展制剂以掺入隧道附近的高渗透挖掘损伤区和低渗透灌浆区。使用由位于假设的晶体沿海含水层中的各种类型的隧道组成的假设深层地质储存系统的示例来证明隧道边界条件的适用性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号