Dynamic compressive properties of dry and saturated coral rocks at high strain rates

摘要

Coral rock is characterized by a high porosity of 48.51 +/- 5.43% and a low compressive strength of 9.91 MPa due to its biological origin. To experimentally investigate the uniaxial compressive behaviors of both air-dried and fully saturated coral rocks, the quasi-static and dynamic compression tests were performed employing an electro-hydraulic servo-controlled device and a split Hopkinson pressure bar (SHPB) apparatus. The combined effects of strain rate and water saturation on the mechanical properties of coral rock were assessed in terms of the uniaxial compressive strength, Young's modulus, brittleness, energy dissipation as well as the failure pattern. The dynamic uniaxial compressive strength and Young's modulus of saturated coral rocks is consistently lower than those under dry condition, while the losses in them reduces with an increase in stain rate. The coral rock behaves in a more brittle manner in dry state than in saturated state, which is validated by the digital image correlation (DIC) in conjunction with high-speed camera images. Likewise, the change in brittleness or specific energy absorption (SEA) with strain rate under dry and saturated conditions exhibits a similar trend to the dynamic compressive strength. Furthermore, the dynamic failure of dry coral rock appears to be more dependent on the inherent flaws and defects than the saturated one, as the failure pattern doesn't follow a fixed shearing or splitting fracture mode. Overall, the difference of dynamic behaviors between dry and saturated coral rocks are mainly controlled by the coupling weakening and strengthening effects induced by free water. The strengthening effect of water saturation is manifested by making the strength and deformability of coral rock more sensitive to the loading strain rate.