Fracture behavior of adhesively bonded carbon fabric composite plates with nano materials filled polymer matrix under DCB, ENF and SLS tests

摘要

In our earlier paper [Srivastava et al. Eng. Fract Mech, 180 (2017)] we found that mode I, mode II fracture toughness of carbon nanotubes (CNTs) filled woven carbon fabric composites increases with the addition of nanofillers. In order to prove the effect of nanofillers on adhesively bonded joints of woven carbon fabric laminates, the present study is conducted under double cantilever beam (DCB), end notched flexural (ENF) and single lap shear (SLS) tests. Graphene nanoplates (GnPs) filled epoxy resin, and carbon blacks (CBs) filled epoxy resin, and pure epoxy resin adhesives were used to prepare the DCB, ENF and single lap adhesively bonded joint specimen from two similar woven carbon fabric composite plates to measure them. Fracture toughness (mode I mode II) and shear strength of adhesively bonded joints were determined.