Sensing mechanism for estimation of the physical properties of an object avoiding failure of the sensors

摘要

Active sensing, in which a robot pushes an object and senses the reaction force or joint angle by means of the force sensor at the point of the contact or on the joint, is one of the effective approaches to estimate the physical properties of an object, such as its compliance. A compliant joint driven by elastic actuators has an advantage over a rigid joint driven by a motor with a high gear ratio in that it absorbs the reaction force, and thus avoids any joint damage during active sensing. However, this approach is not suitable for either rigid joint or a compliant joint because the sensors attached to the contact point and the joint tend to break, owing to iterative contact or an excessive force. Here, this paper adopts a one-degree-of-freedom joint mechanism driven by elastic pneumatic actuators, and focuses on the passivity of the elastic pneumatic actuator, in which the pressure is changed when force is applied, after which it is deformed. By utilizing the passivity of the actuators under a number of conditions, this paper derives multiple regression models of the force and the angle, using the pressures before and after force is applied to the joint mechanism. Experimental results present that the contact information can be estimated from the pressure values and that the joint mechanism can detect the elasticity of an object using the regression models. We also observe the range of the elasticity of the object by tuning the joint compliance. This approach provides a robot hand that can estimate the contact information, including the force and joint displacement, avoiding the failure of the sensors.