首页> 外文期刊>Advanced Powder Technology: The internation Journal of the Society of Powder Technology, Japan >Characterization and synthesis of KTao.1Nbo.9O3 particles via high temperature mixing method under hydrothermal conditions
【24h】

Characterization and synthesis of KTao.1Nbo.9O3 particles via high temperature mixing method under hydrothermal conditions

机译:水热条件下高温混合法表征和合成KTao.1Nbo.9O3颗粒

获取原文
获取原文并翻译 | 示例
       

摘要

KTa_(0.1)Nb_(0.9)O3 (KTN) particles with an orthorhombic perovskite structure have been synthesized via a high temperature mixing method (HTMM) under hydrothermal conditions. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and high-resolution transmission electron microcopy (HRTEM). The influence of alkaline concentration and solvent composition on the phase structure and morphology of the obtained powders was investigated. The results show that the well-crystallized KTN powders with sizes of 200-500 nm are successfully prepared at temperatures as low as 240 °C when the KOH concentration is 2.0 M and the isopropanol/water (I/W) volume ratio equals to 100/0.
机译:通过高温混合法(HTMM)在水热条件下合成了正交晶钙钛矿结构的KTa_(0.1)Nb_(0.9)O3(KTN)颗粒。通过X射线衍射(XRD),扫描电子显微镜(SEM),能量色散光谱(EDS),透射电子显微镜(TEM),选择区域电子衍射(SAED)和高分辨率透射电子显微镜对所得样品进行表征(HRTEM)。研究了碱浓度和溶剂组成对所得粉末相结构和形貌的影响。结果表明,当KOH浓度为2.0 M且异丙醇/水(I / W)体积比等于100时,可以在低至240°C的温度下成功制备尺寸为200-500 nm的结晶良好的KTN粉末。 / 0。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号