Effects of adhesive disbond and thermal residual stresses on the fatigue life of cracked 2024-T3 aluminum panels repaired with a composite patch

摘要

The technology of bonded composite repair has displayed its effectiveness in increasing the residual fatigue life of cracked aeronautical structures. However, two major phenomena reduce the performance of this technique; the adhesive disbond by the fatigue load and the thermal residual stresses due to the adhesive curing. In this study, the effects of the adhesive disbond and the thermal residual stresses on the fatigue life of repaired cracked aluminum plate were analyzed experimentally and numerically. Fatigue tests were performed on cracked 2024-T3 aluminum alloy specimens repaired using carbon/epoxy patches that have artificial disbonds, to highlight the adhesive disbond effect. Fatigue tests were performed on repaired specimen bonded with elevated temperature cure and ambient temperature cure adhesives to evaluate the effect of the thermal residual stresses. To analyze the effects of the two phenomena, the finite element method was used to compute the stress intensity factor at the front of repaired cracks. The experimental results indicate that fatigue life is significantly reduced by the presence of an initial adhesive disbond and thermal residual stresses. The numerical results are consistent with the experimental observations, and reveal that the stress intensity factor increases with an increase in the disbond width. Moreover, it also increases in the presence of thermal residual stresses.