首页> 外文期刊>Advanced Powder Technology: The internation Journal of the Society of Powder Technology, Japan >Intrinsic polarization and resistive leakage analyses in high performance piezo-/pyroelectric Ho-doped 0.64PMN-0.36PT binary ceramic
【24h】

Intrinsic polarization and resistive leakage analyses in high performance piezo-/pyroelectric Ho-doped 0.64PMN-0.36PT binary ceramic

机译:高性能压电/热电Ho-掺杂0.64pmn-0.36pt二元陶瓷的内在极化和电阻泄漏分析

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents in detail the ferroelectric properties of Ho-doped 0.64Pb(Mg1/3Nb2/3)O3-0.36PbTiO3ceramic including determination of intrinsic polarization and investigation of resistive leakage. The effect of Ho3+doping on the structure, dielectric, piezoelectric and ferroelectric properties of PMN-PT ceramics was studied. Perovskite phase of pure and Ho-doped 0.64Pb(Mg1/3Nb2/3)O3-0.36PbTiO3ceramics were synthesized using solid state reaction method. Powder XRD confirmed the incorporation of Ho3+ions in PMN-PT lattice. EDX spectra confirmed the existence of Ho and its homogeneity in doped-sample. The average grain size, transition temperature and dielectric loss factor (tan δ) decreased while the density and the dielectric constant of the PMN-PT ceramic increased by Ho doping. Furthermore, an increase in the ferroelectric properties and the piezoelectric coefficient (d33?, from 547 to 610?pm/V) were observed for doped sample. The ‘Remanent Hysteresis Task’ revealed that a major portion (80.42%) of the remanent polarization (Pr) is switchable in the sample which makes Ho-doped PMN-PT a potential material for memory switching devices. Time-dependent compensated (TDC) hysteresis task and fatigue test were carried out which revealed resistive leakage and fatigue free nature of Ho-doped PMN-PT ceramic. These results demonstrate that Ho-doped PMN-PT ceramic possesses excellent properties to achieve a variety of applications.
机译:本文详细介绍了Ho-掺杂0.64pb(Mg1 / 3nb2 / 3)O 3 -0.36pbtiO3的铁电性能,包括确定内在极化和电阻泄漏的调查。研究了HO3 +掺杂对PMN-PT陶瓷结构,电介质,压电和铁电性能的影响。使用固态反应方法合成纯和HO掺杂0.64pb(Mg1 / 3nb2 / 3)O 3 -0.36pbbtiO3的钙钛矿相。粉末XRD确认在PMN-Pt晶格中掺入HO3 +离子。 EDX Spectra确认了掺杂样品中HO及其均匀性的存在。平均晶粒尺寸,过渡温度和介电损耗因子(TANδ)降低,而PMN-PT陶瓷的密度和介电常数由HO掺杂增加。此外,对于掺杂的样品,观察到铁电性质和压电系数(547至610〜610.μm/ v)的增加。 “剩磁滞后任务”显示,倒置极化(PR)的主要部分(80.42%)可在样品中切换,该样品使HO掺杂PMN-PT用于存储器开关装置的潜在材料。进行了时间依赖的补偿(TDC)滞后任务和疲劳试验,其揭示了Ho掺杂PMN-PT陶瓷的电阻渗漏和疲劳性质。这些结果表明,Ho掺杂的PMN-PT陶瓷具有优异的性能,以实现各种应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号