...
首页> 外文期刊>Bulletin of the Polish Academy of Sciences. Technical Sciences >Current-fed quasi-Z-source H7 inverter with reduced stress on SiC power devices
【24h】

Current-fed quasi-Z-source H7 inverter with reduced stress on SiC power devices

机译:电流馈电准Z源H7逆变器对SiC电源装置的应力降低

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This paper discusses selected problems regarding a high-frequency improved current-fed quasi-Z-source inverter(iCFqZSI) designed and built with SiC power devices.At first,new,modified topology of the impedance network is presented.As the structure is derived from the series connection of two networks,the voltage stress across the SiC diodes and the inductors is reduced by a factor of two.Therefore,the SiC MOSFETs may be switched with frequencies above 100 kHz and volume and weight of the passive components is decreased.Furthermore,additional leg with two SiC MOSFETs working as a bidirectional switch is added to limit the current stress during the short-through states.In order to verify the performance of the proposed solution a 6 kVA laboratory model was designed to connect a 400 V DC source(battery) and a 3x400 V grid.According to presented simulations and experimental results high-frequency iCFqZSI is bidirectional-k may act as an inverter,but also as a rectifier.Performed measurements show correct operation at switching frequency of 100 kHz,high quality of the input and output waveforms is observed.The additional leg increases efficiency by up to 0.6%-peak value is 97.8%.
机译:本文讨论了关于高频改进的电流馈电准Z源逆变器(ICFQZSI)设计和构建的选定问题,采用SIC Power Devices设计。首先,介绍了阻抗网络的新修正拓扑.As派生结构从两个网络的串联连接,SiC二极管和电感器上的电压应力减少了两倍。因此,SiC MOSFET可以用高于100kHz的频率切换,并且无源元件的体积和重量减小。此外,添加了与双向开关一起工作的两个SiC MOSFET的额外腿,以限制在短通状态期间的电流应力。为了验证所提出的解决方案的性能,设计了6 kVA实验室模型,以连接400 V DC源(电池)和3x400 V网格。根据呈现的模拟和实验结果高频ICQZSI是双向-K可以充当逆变器,也可以作为整流器。表现测量TS在开关频率下显示正确的操作,观察到高质量的输入和输出波形。额外的腿提高了0.6%-Peak值为97.8%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号