...
首页> 外文期刊>Journal of thermal analysis and calorimetry >Preparation of modified fly ash hollow glass microspheres using ionic liquids and its flame retardancy in thermoplastic polyurethane
【24h】

Preparation of modified fly ash hollow glass microspheres using ionic liquids and its flame retardancy in thermoplastic polyurethane

机译:使用离子液体改性粉煤灰中空玻璃微球的制备及其在热塑性聚氨酯中的阻燃性

获取原文
获取原文并翻译 | 示例
           

摘要

In this article, a new type of flame-retardant HGM@[EOOEMIm][PF6] was prepared by modifying fly ash hollow glass microspheres (HGM) with ionic liquids 1-((ethoxycarbonyl)methyl)-3-methylimidazolium hexafluorophosphate([EOOEMIm][PF6]). The physical and chemical characteristic of HGM@[EOOEMIm][PF6] was tested by scanning electron microscope-energy-dispersive spectrometer and X-ray photoelectron spectroscopy, respectively. The flame-retardant characteristics including heat and smoke production of TPU composites were investigated using cone calorimeter test (CCT) and limiting oxygen index, etc. The CCT results revealed that the heat release rate (HRR), total smoke release, and smoke factor and so on decreased greatly with the addition of HGM@[EOOEMIm][PF6]. For example, when the loading of HGM@[EOOEMIm][PF6] was 0.125 mass%, the peak HRR value of the sample was decreased to 779.3 kW m(-2) (TPU2), reduced by 23.7% compared with TPU1 (1021.1 kW m(-2)) containing the same loading of HGM. The thermal degradation behaviors of TPU composites have also been indicated by thermogravimetric analysis/infrared spectrometry (TG-IR). The TG-IR results showed that HGM@[EOOEMIm][PF6] could not only improve the thermal stability of TPU composites at high temperature, but also reduce the aromatic compounds as the smoke precursors. In all, HGM@[EOOEMIm][PF6] will make a great influence in improving the flame retardancy of TPU.
机译:在本文中,通过用离子液体1 - ((乙氧基羰基)甲基)-3-甲基咪唑六氟磷酸([EOOEMIM)来通过改变粉煤灰中空玻璃微球(HGM)来制备新型的阻燃HGM @ [EOOEMIM] [PF6]。(((乙氧基羰基)六氟磷酸铵([EOOEMIM ] [pf6])。通过扫描电子显微镜 - 能量 - 分散光谱仪和X射线光电子能谱来测试HGM @ [EOOEMIM] [PF6]的物理和化学特性。研究了包括TPU复合材料的热量和烟雾生产的阻燃特性,并使用锥形量热计测试(CCT)和限制氧指数等。CCT结果表明,热释放率(HRR),总烟雾释放和烟雾因子和烟雾因子因此,随着HGM @ [EOOEMIM] [PF6]的添加大大减少了。例如,当HGM @ [EOOEMIM] [PF6]的负载为0.125质量%时,样品的峰值HRR值降低至779.3 kWm(-2)(TPU2),与TPU1相比减少了23.7%(1021.1 kw m(-2))含有相同载荷的HGM。 TPU复合材料的热劣化行为也通过热重分析/红外光谱(TG-IR)表示。 TG-IR结果表明,HGM @ [EOOEMIM] [PF6]不仅可以在高温下提高TPU复合材料的热稳定性,而且还将芳族化合物还原为烟雾前体。总而言之,HGM @ [EOOEMIM] [PF6]将对改善TPU的阻燃性产生很大影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号