...
首页> 外文期刊>Journal of Fluid Mechanics >Stable and unstable miscible displacements in layered porous media
【24h】

Stable and unstable miscible displacements in layered porous media

机译:层状多孔介质中稳定和不稳定的混溶性位移

获取原文
获取原文并翻译 | 示例

摘要

The effect of permeability heterogeneities and viscosity variations on miscible displacement processes in porous media is examined using high-resolution numerical simulations and reduced theoretical modelling. The planar injection of one fluid into a fluid-saturated, two-dimensional porous medium with a permeability that varies perpendicular to the flow direction is studied. Three cases are considered, in which the injected fluid is equally viscous, more viscous or less viscous than the ambient fluid. In general it is found that the flow in each case evolves through three regimes. At early times, the flow exhibits the concentration evolves diffusively, independent of both the permeability structure and the viscosity ratio. At intermediate times, the flow exhibits different dynamics including channelling and fingering, depending on whether the injected fluid is more or less viscous than the ambient fluid, and depending on the relative magnitude of the viscosity and permeability variations. Finally, at late times, the flow becomes independent of the viscosity ratio and dominated by shear-enhanced (Taylor) dispersion. For each of the regimes identified above, we develop reduced-order models for the evolution of the transversely averaged concentration and compare them to the full numerical simulations.
机译:使用高分辨率数值模拟检查渗透性异质性和粘度变化对多孔介质中的混溶性位移过程的影响,并降低理论模拟。研究了一种流体将一个流体注入流体饱和的二维多孔介质,其具有垂直于流动方向的渗透率。考虑了三种情况,其中喷射的流体同等粘性,比环境液更粘稠,更粘稠或更低的粘性。一般来说,发现每种情况的流动通过三个制度发展。在早期时,流动表现出浓缩的浓缩,散伸,与渗透结构和粘度比无关。在中间时间,流动表现出不同的动力学,包括沟道和指法,这取决于注入的流体是否比环境流体更大或更小,并且取决于粘度和渗透性变化的相对幅度。最后,在延迟时,流动变得与粘度比无关,并通过剪切增强(泰勒)分散来支配。对于上述所识别的每个制度,我们为横向平均浓度的演变开发了减少的模型,并将它们与全部数值模拟进行了比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号