Linearization of Patterned Pinning Spin Valve Devices for Low-Field Applications

摘要

In spin valve sensors, the bias point caused by the interlayer coupling between the pinned layer and the free layer is a crucial issue encountered in the design process, which degrades the responsivity and the weak-field detection feature. In tackling this issue, we present the magnetic bias technique for efficient control of the bias point of the pinned spin valve (PSV). Specifically, the magnetic field that creates a shift of the bias point is generated by a coil being wrapped around the PSV devices. The PSV multilayer structure, Ta(5 nm)/NiFe(3 nm)/CoFe(4.5 nm)/Cu(1.5 nm)/CoFe(2.4 nm)/IrMn(10 nm)/Ta(5 nm), was fabricated using DC magnetron sputtering deposition. The PSV devices patterned by using a simple lift-off technique have a dimension of 1.5 mu m x 200 mu m. The bias magnetic field was tuned between +/- 5 mT by changing an external DC current. Our experimental results indicate that the bias point can be efficiently controlled via a simple adjustment of the current in the bias coil. Consequently, the device responsivity was remarkably enhanced by a factor of 6.75, from 0.8 V/T to 5.4 V/T, leading to a decrease of the detectivity (field noise) from 366 nT/root Hz@1 Hz to 108 nT/root Hz@1 Hz. Additionally, the field noise was further suppressed by a factor of 5 from 363 nT/root Hz@1 Hz to 72 nT/root Hz@1 Hz by applying the AC-driven mode in the half-bridge PSV. The simplicity of our proposed technique makes it particularly pertinent to PSV sensor designs for low-field applications.